Adjusting the Picture Settings
Your television has several settings which allow you to control picture quality.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the … or † button to select Picture.
Result: The options available in the Picture group are displayed.
3Press the ENTER ( ) button.
4Select the required option (Custom, Colour Tone) pressing the … or † button.
5Press the … or † button to select Custom. Press the ENTER ( ) button.
Result: The Custom menu is displayed.
6Press the ENTER ( ) button to change the setting. The options are displayed in the following order.
◆Custom : Contrast, Brightness, Sharpness, Colour, or Tint(NTSC ONLY).
➢Custom Options available in PC, DVI Mode: Contrast,
Brightness, or Sharpness.
➢The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button.
➢When the picture mode is set to Custom, the settings values may vary depending on the input source.
(ex. RF, Video, Component, PC, or DVI)
➢If you make any changes to these settings, the picture standard is automatically switched to the Custom
◆Colour Tone : Cool2, Cool1, Normal, Warm1, or Warm2.
7When you are satisfied with the settings, press the EXIT/TV ( ) button to return to normal viewing.
➢If you make any changes to these settings, the picture standard is automatically switched to the Custom.
TV |
| Picture |
|
Mode |
| : Dynamic | √ |
Custom |
|
| √ |
Colour Tone | : Normal | √ | |
Colour Control |
| √ | |
Film Mode | : Off | √ | |
Size |
| : 16 : 9 | √ |
PIP |
|
| √ |
† More |
|
|
|
Move | Enter | Return |
|
|
|
|
|
TVCustom
Contrast 70
Brightness 50
Sharpness 70
Colour 50
Tint G50 R50
Move | Enter | Return |
Contrast |
| 70 |
TVPicture
Mode : Dynamic
Custom
Colour Tone : NormalCool2
Colour Control Cool1
Film Mode : OffNormal
Size : 16 : 9
Warm1
PIPWarm2
†More
Move | Enter | Return |
English - 27