Samsung PS-42E71HD Input Mode PC, Setting the PC, Video Signal Resolution, Vertical Horizontal

Input Mode (PC)

Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:

Video Signal	Resolution	Vertical frequency	Horizontal frequency	Vertical	Horizontal
	(Dot X Line)	(Hz)	(kHz)	polarity	polarity
	640 x 350	70.086	31.469	P	N
	720 x 400	70.087	31.469	N	P
		59.940	31.469	N	N
	640 x 480	70.000	35.000	N/P	N/P
		72.809	37.861	N	N
		75.000	37.500	N	N
		56.250	35.156	N/P	N/P
IBM PC / AT	800 x 600	60.317	37.879	P	P
		70.000	43.750	N/P	N/P
Compatible
		72.188	48.077	P	P
		75.000	46.875	P	P
	848 x 480	60.000	31.020	P	P
		74.769	37.684	P	N
		60.004	48.363	N	N
	1024 x 768	70.069	56.476	N	N
		72.000	57.672	N/P	N/P
		75.029	60.023	P	P

(N: Negative / P: Positive)

◆The interlace mode is not supported.

◆The television might operate abnormally if a non-standard video format is selected.

◆480i/p, 576i/p, 720p, or 1080i is not available in PC mode.

◆The PC text quality is optimum in XGA mode (1024 x 768@60Hz).

Setting the PC

TV	PC
Image Lock
Position
Auto Adjustment
Image Reset
Move	Enter	Return
TV	Image Lock
Coarse		50
Fine		0

Move	Enter	Return
TV	Position

Move Enter Return

Auto Adjustment in progress

Please wait

Image Reset has completed.

Return

➢Preset to the PC mode by pressing the SOURCE ( ) button.

1Press the MENU ( ) button to display the menu.

2Press the … or † button to select Setup, then press the ENTER/OK ( ) button.

3Press the … or † button to select PC, then press the ENTER/OK ( ) button.

4Select the required option by pressing the … or † button, then press the ENTER/OK ( ) button.

Available options: Image Lock, Position, Auto Adjustment, Image Reset

5When you are satisfied with your setting, press the ENTER/OK ( ) button.

6Press the EXIT button to exit.

◆Image Lock: Coarse/Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again.

After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

1Press the … or † button to select Coarse or Fine, then press the ENTER/OK ( ) button.

2Press the œ or √ button to adjust the screen quality, vertical stripes may appear or the picture may be blurry. Press the ENTER/OK ( ) button.

◆Position:

Adjust the PC’s screen positioning if it does not fit the TV screen.

1Adjust the position by pressing the …/†/œ/√ button.

2Press the ENTER/OK ( ) button.

◆Auto Adjustment:

Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.

The values of fine, coarse and position are adjusted automatically.

◆Image Reset:

You can replace all image settings with the factory default values.

English - 20