Installing Batteries in the Remote Control
1Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
➢ Make sure to match the “+” and
3Close the cover as shown in the figure.
➢ Remove the batteries and store them in a cool, dry place if you won’t be using
the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)
➢If the remote control doesn’t work! Check the following:
1.Is the TV power on?
2.Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
SwitchingYourTelevision On and Off
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the 
(Power) button (On/Off) on the front of the television or press the POWER (
) button on the remote control to switch the television on. The programme that you were watching last is
If you have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically” on page 10 or “Storing Channels Manually” on page 11.
➢If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Plug & Play Feature” on page 9.
3To switch the television off, press the 
(Power) button (On/Off) on the front of the television or press the POWER (
) button on the remote control.
4To switch the TV on, press the 
(Power) button (On/Off) on the front of the TV or press the POWER (
) button or number buttons on the remote control.
Viewing the Menus
TVInput
Source List | : TV |
|
Edit Name |
|
|
Move | Enter | Exit |
1Press the MENU ( 
) button.
The main menu is displayed on the screen.
Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2Press the … or † button to select one of the icons.
Press the ENTER/OK ( 
) button to access the icon’s
3Press the … or † button to move to items in the menu.
Press the ENTER/OK ( 
) button to enter items in the menu.
4Press the …/†/œ/√ button to change the selected items. Press the MENU ( 
) button to return to the previous menu.
5Press the EXIT button to exit from the menu.
English - 8