Samsung PS-42C7HD manual Troubleshooting

Page 39

How to Install the Wall Mount Bracket

Connecting External Devices to the PDP

➢To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions:

1 Be sure to remove the safety pins underneath the PDP.

➢If the safety pins are not removed, the angle cannot be adjusted. Any attempt to do so may cause damage to

the PDP.

2Hold onto the bottom of the PDP and pull forward fully as directed by the arrow as illustrated) to adjust the angle. (0°~20° by 2°) Insert the Safety Pins to the front guide

holes on both sides as illustrated in figure @.

➢ Viewing the PDP after connecting the external devices Remove the Safety Pins to adjust the angle to 0°, and then secure the Safety Pins again.

☛ For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used, the PDP may fall, causing serious injury.

Troubleshooting

Before contacting the Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.

No sound or picture

◆Check that the mains lead has been connected to a wall socket.

◆Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER () button on the remote control.

◆Check the picture contrast and brightness settings.

◆Check the volume.

◆Check if Internal Mute is set to ON.

Normal picture but no sound

◆Check the volume.

◆Check whether the volume MUTE button on the remote control has been pressed.

No picture or black and white picture

◆Adjust the colour settings.

◆Check that the broadcast system selected is correct.

Sound and picture interference

◆Try to identify the electrical appliance that is affecting the television, then move it further away.

◆Plug the television into a different mains socket.

Blurred or snowy picture, distorted sound

◆Check the direction, location and connections of your aerial. This interference often occurs due to the use of an indoor aerial.

Remote control malfunctions

◆Replace the remote control batteries.

◆Clean the upper edge of the remote control (transmission window).

◆Check that the “+” and “–” ends of the batteries are inserted correctly.

◆Check that the batteries are drained.

Screen is black and power indicator light blinks steadily

◆On your computer check; Power, Signal Cable.

◆The TV is using its power management system.

◆Move the computer’s mouse or press any key on the keyboard.

◆On your equipment check (STB, DVD, etc) ; Power, Signal Cable.

◆The TV is using its power management system.

◆Press the Source button on the panel or remote control.

◆Turn the TV off and on.

English - 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents PDP-TELEVISION Checking Parts User InstructionsContents Previewing the DTV Menu System depending on the model Viewing the EPG Electronic Programme Guide InformationViewing All Channels and Favourite Channels ´ headphones jack Power buttonPower Indicator Remote Control SensorCommon Interface Slot Connecting external Audio DevicesDTV Service Input/Output SpecificationViewing the Remote Control depending on the model  Picture freeze Sound mode selection Remote control setupTeletext Functions Refer to Viewing the Menus Installing Batteries in the Remote ControlSwitchingYourTelevision On and Off If the remote control doesn’t work! Check the followingPress the Menu button to display the menu Plug & Play FeatureThis function will automatically cancel five minutes later Freezing the Current PicturePress the Exit button to exit Viewing an External Signal SourceEditing Device Names Storing Channels AutomaticallySound System BG/DK/I/L Storing Channels ManuallyAdding / Locking Channels Colour System AUTO/PAL/SECAM/NTSCLocking channels Not available in DTV or external input modeSorting the Stored Channels Assigning Names to ChannelsAvailable modes Dynamic, Standard, Movie, Custom FineTuning Channel ReceptionLNA Low Noise Amplifier Changing the Picture StandardColour Tone Cool2/Cool1/Normal/Warm1/Warm2 Customizing the Picture SettingsPress the œ or √ button until you reach the optimal setting Selecting the Picture SizeTable of PIP Settings Digital NR / SMD / DNIe DemoViewing the Picture in Picture PIP If Game Mode is On Sound FeaturesAuto Power Off Time FeaturesSleep Timer On Timer / Off TimerLanguage / Blue Screen / Melody / Energy Saving Using Game ModeHorizontal Dot Vertical Line Time minute Setting the Blue EyeAvailable options Pixel Shift, All White, Signal Pattern Screen Burn ProtectionSetting upYour PC Software Based on Windows XP Input Mode PCVertical Image Lock Coarse/Fine Setting the PCAuto Adjustment Image ResetPreviewing the DTV Menu System depending on the model Press the D.MENU button on your remote controlUpdating the Channel Manager Manually Updating the Channel Manager AutomaticallyPress the D.MENU button Result The DTV menu is displayed EditingYour Favourite ChannelsMove PreviewDelete Displaying Programme Information Viewing Channel ManagerScrolls backwards quickly Viewing the EPG Electronic Programme Guide InformationThen All Channels listWeekly Using the Scheduled ListSetting the Default Guide When the favourite channel manager has not been set upViewing All Channels and Favourite Channels Setting the Preferred Languages ChoosingYour LanguagePreferred Subtitle Language Preferred Audio Language Setting up the Parental Lock Adjusting theTranslucency LevelResult The Product Information is selected Using the Preferred FeaturesChecking the Product Information Subtitle Subtitle Language Audio Language Digital TextUpgrading the Software Option Checking the Signal InformationSelecting the CI Common Interface Menu Viewing Common InterfaceResetting ´ sub-page ∏ mode cancel Teletext on/mixHow to Install the Wall Mount Bracket On the right How to Adjust Mounting AngleInstructions on Securing the SET to the Wall Mount Bracket Panel bracketTroubleshooting This page is intentionally Left blank This page is intentionally Left blank This page is intentionally Left blank Waste Electrical & Electronic Equipment Correct Disposal of This ProductContact Samsung WORLD-WIDE
Top Page Image Contents