Setting the PC

Coarse and Fine Tuning of the Image (Image Lock):

The purpose of picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

1.Preset: Press the SOURCE button to select PC mode.

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

3.Press the ▲ or ▼ button to select "PC", then press the

ENTER button.

4.Press the ENTER button to select "Image Lock".

5.Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.

6.Press the ◄ or ► button to adjust the screen quality. Press the ENTER button.

7.Press the EXIT button to exit.

Changing the Image Position:

Adjust the PC’s screen positioning if it does not fit the TV screen.

1.Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select "Position", then press the

ENTER button.

3.Press the ▲ or ▼ button to adjusting the Vertical-Position.

Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER button.

4.Press the EXIT button to exit.

Initializing the Image Settings (Image Reset):

You can replace all image settings with the factory default values.

1.Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select "Image Reset", then press the ENTER button.

3.Press the EXIT button to exit.

		Setup
	Plug & Play	
	Language	
	Time	
	Blue Screen	
	PC	
Move	Enter	Return
		PC


Image Lock	
Position	
Image Reset	
Auto Adjustment	

Move Enter Return

		Image Lock
	Coarse	1680
	Fine	83
Move	Enter	Return
		PC

	Image Lock	
	Position	
	Image Reset	
	Auto Adjustment	


Move	Enter	Return

Position

Adjust	Enter	Return
		PC
	Image Lock	
	Position	
	Image Reset	
	Auto Adjustment	
Move	Enter	Return

Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

1.Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button.

3.Press the EXIT button to exit.

		PC
	Image Lock	
	Position	
	Image Reset	
	Auto Adjustment	
Move	Enter	Return

English - 27