Samsung UE40B7000, UE40B7020 Mini Remote Control, Installing Batteries in the Remote Control

Mini Remote Control

■The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only.

1Television Standby button.

■This button only works when you press it for longer than 1.5 seconds.

2<: Next channel / >: Previous channel

3+ : Volume up / – : Volume down

4IrDA transmitter

■Use the Mini Remote Control so that this part faces the TV.

4

1

2

33

2

15

English Getting Started

Installing Batteries in the Remote Control

	Normal Remote Control
1	Lift the cover at the back of the remote control upward as shown in the figure.
2	Install two AAA size batteries.
	■ Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
	the compartment.
3	Replace the cover.
	■ Remove the batteries and store them in a cool, dry place if you won’t be using
	the remote control for a long time. (Assuming typical TV usage, the batteries
	should last for about one year.) OPERATION
	Mini Remote Control
1	Turn the battery cover counterclockwise to unlock it and then separate the battery
	cover.
2	Insert the corresponding 3V Lithium battery.
3	Place the battery cover into the remote control aligning it with the grooves and then
	turn the battery cover clockwise to lock the cover.

■ If the remote control doesn’t work, check the following: • Is the TV power on?

• Are the plus and minus ends of the batteries reversed? • Are the batteries drained?

• Is there a power outage or is the power cord unplugged?

• Is there a special fluorescent light or neon sign nearby?OPERATION

OPEN

CLOSE