Official Samsung UE40B7020 Flat Panel Television Manual

		Picture
Option		Description
Picture Options	■ 100Hz Motion Plus → Off / Clear / Standard / Smooth
	/ Custom / Demo
	Removes drag from fast scenes with a lot of movement to
	provide a clearer picture.
	If you enable 200 Hz Motion Plus, noise may appear on
	the screen. If this occurs, set 100Hz Motion Plus to Off.
		Off: Switches 100Hz Motion Plus off.
		Clear: Sets 100Hz Motion Plus to minimum.
		Standard: Sets 100Hz Motion Plus to medium.
		Smooth: Sets 100Hz Motion Plus to maximum.
		Custom: Adjusts the blur and judder reduction
		level to suit your preference.
		● Blur Reduction: Adjusts the blur reduction level
		from video sources.
		● Judder Reduction: Adjusts the judder reduction
		level from video sources when playing films.
		● Reset: Reset the custom settings.
		Demo: Displays the difference between 100Hz
		Motion Plus on and off modes.
	■ Blue Only Mode
	Helps to adjust the colour and tint controls when used with
	colour bar test patterns. Recommended for qualified picture
	alignment specialists only. Available only when the Picture
	Mode is set to Movie or Standard.
Picture Reset	Resets all picture settings to the default values.
	■ Reset Picture Mode: Current picture values return to
	default settings.

■Blue Only Mode is available when the picture mode is set to Movie or Standard.

English Using the Menus

	Picture (In the PC mode)
Option	Description
Auto Adjustment	Use the Auto Adjust function to have the TV set
	automatically adjust the video signals it receives.
	The function also automatically fine-tunes the settings and
	adjusts the frequency values and positions.
Screen	■ Coarse / Fine
	The purpose of picture quality adjustment is to remove or
	reduce picture noise. If the noise is not removed by Fine-
	tuning alone, then adjust the frequency as best as possible
	(Coarse) and Fine-tune again. After the noise has been
	reduced, readjust the picture so that it is aligned on the
	centre of screen.
	■ PC Position
	Adjust the PC’s screen positioning if it does not fit the TV
	screen.
	Press the ▲ or ▼ button to adjusting the Vertical-Position.
	Press the ◄ or ► button to adjust the Horizontal-Position.
	■ Image Reset
	You can replace all image settings with the factory default
	values.

■Preset: Press the SOURCE button to select PC mode.

■This function does not work in DVI-HDMI mode.

■Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto

Adjustment.

Picture Reset