Samsung UE40B8000 Network Setup Cable Network Setup-Manual, Connecting WPS Wi-Fi Protected Setup

40

English Using the Menus

	Setup
Option	Description
Network Setup	Cable Network Setup-Manual

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP).

1.Set Network Type to Cable.

2.Select Cable Network Setup.

3.Set Internet Protocol Setup to Manual.

4.Set up IP Address, Subnet Mask, Gateway and DNS Server.

■Press the number buttons on the remote control when you set the Network manually.

5.Select Network Test to check the network connectivity.

■Wireless Network Setup

•Internet Protocol Setup → Auto / Manual

•Network Test: You can test or confirm the network connection status after setting up the network.

•Select a network: Access Point: You can select the IP sharer to use when using a wireless network.

●If a wireless Access Point is not in the Access Point list, press the Red button.

●When the connection is made, you will be returned to the screen automatically.

●If you have selected an Access Point with a security authentication: The Security Key input screen appears. Enter the security key and press the Blue button on the remote control.

●If security encryption type is WEP, 0~9, A~F will be available when you input security key.

Connecting WPS (Wi-Fi Protected Setup)

If Security Key is already set: In access point list, select

WPS.

■You can select PBC, PIN, Security Key.

•Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC button on the AP (access point) within 2minutes, and wait for connection.

•Connecting by using PIN: Select a PIN (Personal Identification Number).

●The message showing the PIN Code is displayed. Input the PIN Code at AP device within 2minutes. Select OK and wait for connection.

●Try again if connecting operation doesn’t work.

●When the connection is not established although tried again, reset the access point. Please refer to a manual of each access point.

•Connecting by using Security Key: When selecting Security Key, the input window is displayed. Input the security key and press ENTEREbutton.

●Try again if connecting operation doesn’t work.

•If Security Key is not set: When security setting of AP that supports WPS is NONE, you can select PBC, PIN, None Security. None Security is capable of connecting to AP directly without using WPC function.

●Process of PBC, PIN is same as above. Refer to if Security Key is already set.

●Try again if connecting operation doesn’t work.

■The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

Wireless Network Setup

Security Key

A	B	C	D	E	F	Number
						Delete
						Done

nMove `~9Number EEnter RReturn

			Wireless Network Setup
Select a network									3/9
				sson
							PBC
				jee
							PIN
	Search			AP_1
							Security Key
	Ad-hoc			Ap_2
						UMove	EEnter		RReturn
Press the PBC button on the access point.
Access Point Name : AP_1
					Cancel
Press OK After input TV’s Pin code in the access
point’s setup.
Access Point Name : AP_1
PIN Code : 12345678
				OK		Cancel
				Wireless Network Setup
Security Key
A	B	C		D	E	F	G	Number
								Lowercase
H	I	J		K	L	M	N
								Delete
O	P	Q		R	S	T	U	Done
V	W	X		Y	Z
				nMove		`~9Number		EEnter	RReturn
			Wireless Network Setup
Select a network									3/9
				sson
							PBC
				jee
							PIN
	Search			AP_1
							None Security
	Ad-hoc			Ap_2
						UMove	EEnter		RReturn