Samsung UE40B8000 Self Diagnosis, Software Upgrade, HD Connection Guide, Contact Samsung

44

English Using the Menus

		Support
Option		Description
Self Diagnosis	■ Signal Information (digital channels only)
	Unlike analogue channels, which can vary in reception
	quality from ‘snowy’ to clear, digital (HDTV) channels have
	either perfect reception quality or you will not receive them
	at all. So, unlike analogue channels, you cannot fine tune
	a digital channel. You can, however, adjust your antenna to
	improve the reception of available digital channels.
Software Upgrade	Samsung may offer upgrades for the TV’s firmware in the
	future. These upgrades can be performed via the TV when
	it is connected to the Internet, or by downloading the new
	firmware from samsung.com to a USB memory device.
	•	Current Version is the software already installed in
	•	the TV.
		Alternative Software (Backup) shows the previous
	•	version that will be replaced.
		Software is represented as ‘Year/Month/Day_Version’.
		The more recent the date, the newer the software
		version. Installing the latest version is recommended.
	■ By USB
	Insert a USB drive containing the firmware upgrade
	downloaded from samsung.com into the TV. Please be
	careful to not disconnect the power or remove the USB
	drive while upgrades are being applied. The TV will turn
	off and turn on automatically after completing the firmware
	upgrade. Please check the firmware version after the
	upgrades are complete (the new version will have a
	higher number than the older version). When software is
	upgraded, video and audio settings you have made will
	return to their default (factory) settings. We recommend you
	write down your settings so that you can easily reset
	them after the upgrade.
	■ By Channel
	Upgrades the software using the broadcasting signal.
	•	If the function is selected during the software
		transmission period, this function searches for
	•	available software and downloads the software.
		The time required to download the software is
		determined by the signal status.
	■ Standby Mode Upgrade
	To continue software upgrade with master power on,
	Select On by pressing the ▲ or ▼ button. 45 minutes after
	entering standby mode, a manual upgrade is automatically
	conducted. Since the power of the unit is turned on
	internally, the screen may be on slightly for the LED
	product. This phenomenon may continue for more than 1
	hour until the software upgrade is completed.
	■ Alternative Software (Backup)
	If there is an issue with the new firmware and it is affecting
	operation, you can change the software to the previous
	version.
	•	If software was changed, existing software is
	•	displayed.
		You can change current software to alternative
		software by Alternative Software.
HD Connection Guide	This menu presents the connection method that provides
	the optimal quality for the HD TV. Refer to this information
	when connecting external devices to the TV.
Contact Samsung	View this information when your TV does not work properly
	or when you want to upgrade the software. You can view
	the information regarding the call centre, product and
	software file download method.

■If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.

TV Rear Panel

		or
	USB Drive
Software Upgrade
Current Version	2009/01/17_000001
By USB			▶
By Channel
Standby Mode Upgrade	: 45 Min
Alternative Software	2009/01/16_000000

UMove EEnter RReturn