Samsung Complete Setup Guide for UE40B8000 Flat Panel Television

	Setup
Option	Description
Network Setup	• Ad-hoc: You can connect to a mobile device
	without an access point through the ‘Samsung
	Wireless LAN Adapter’ by using a peer to peer
	network.

How to connect to new Ad-hoc

1.Choose Select a network, then a device list is displayed.

2.While in the device list, press the Blue button on the remote or select Ad-hoc.

■The message that means the existing network is disconnected is displayed.

3.Input the generated Network Name(SSID) and Security Key into the device you want to connect.

How to connect an existing Ad-hoc device

1.Choose Select a network, the device list is displayed.

2.Select the device you want in the Device list.

3.If security key was applied, input the security key again.

■If network doesn’t operate normally, please check the Network Name(SSID) and Security Key again. If the Security Key is incorrect, it may be the reason for the malfunction.

Wireless Network Setup-Auto

If you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc mode can be connected without DHCP.

1.Set Network Type to Wireless.

2.Select Wireless Network Setup.

3.Set Internet Protocol Setup to Auto.

■ The Internet Protocol is set automatically.

4.Select a network through Select a network.

5.Select Network Test to check the network connectivity.

Wireless Network Setup-Manual

1.Set Network Type to Wireless.

2.Select Wireless Network Setup.

3.Set Internet Protocol Setup to Manual.

4.Set up IP Address, Subnet Mask, Gateway and DNS Server.

■Press the number buttons on the remote control when you set the Network manually.

5.Select Network Test to check the network connectivity.

When unable to connect to an AP(Access Point)

Your TV may fail to locate an AP(Access Point) that is configured as a private SSID type. In this case, please change the AP settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics.

The existing network system may have limited functionality. Do you want to change the network connection?

Yes No

Wireless Network Setup

Internet Protocol Setup		: Auto					▶
Network Test
Select a network		: AP1
IP Address
Subnet Mask
Gateway
DNS Server
			UMove		EEnter		RReturn
Wireless Network Setup
Internet Protocol Setup	: Manual						▶
Network Test
Select a network	: AP1
IP Address	:
		0	0	0		0
Subnet Mask	:
		0	0	0		0
Gateway	:
		0	0	0		0
DNS Server	:
		0	0	0		0
			UMove		EEnter		RReturn

41

English Using the Menus