Samsung 320P Coarse, Fine, Adjusts the screen location horizontally and vertically, Sharpness

3) Blue

If you adjust picture using Color Control function, Color Tone will turn to Custom mode.

Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

1) Coarse

: Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

2) Fine

: Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed).

	3)	Position
	: Adjusts the screen location horizontally and vertically.
Auto	The values of Fine, Coarse, position are adjusted
Adjustment	automatically.
	If you change resolution in the control panel, auto function
	will be executed.
	- The direct button on the remote control is 'AUTO'
	button.
Signal	Used to make up for the weak RGB signal which has been
Balance	transmitted by a long signal cable.
	1)	Signal Balance
	You can select with the signal control either On or Off.
	2)	Signal Control
	You can adjust the R Phase, G Phase, B Phase, Gain and
	Sharpness manually.
Size	You can switch the Size.
	1)	16:9
	2)	4:3
PIP Picture	You can adjust the PIP Screen Settings.
	1)	Contrast

:Adjusts the Contrast of the PIP window on the screen.

2) Brightness

:Adjusts the Brightness of the PIP window on the screen.

3) Sharpness

:Adjusts the difference between the lightest and darkest areas of the PIP window.

4) Color

:Adjusts the Color of the PIP window on the screen.

5) Tint

:Adds a natural tone to the PIP window.

Available Mode : PIP

1)Coarse / Fine

3)Position

1)Signal Balance

2)Signal Control

AV / S-Video / Component Mode