Samsung 320P manual Screen is blank and is blinking, Problems related to Audio, No sound

Page 58

Problems

Screen is blank and power indicator is off

"Check Signal Cable" message

"Not Optimum Mode " message

Picture rolls vertically.

Image is not clear. Picture is blurred.

Picture image is unstable and vibrates.

Ghost images are shown in the picture.

The image is too light or too dark

Screen color is inconsistent.

Color image is distorted with dark shadows.

White color is poor.

Power Indicator blinks green.

Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds

The screen is blank and is blinking.

Solutions

zEnsure that the power cord is firmly connected and the LCD monitor is on.

(Refer to the Connecting the Monitor)

zEnsure that the signal cable is firmly connected to the PC or video sources.

(Refer to the Connecting the Monitor)

zEnsure that the PC or video sources are turned on.

zCheck the maximum resolution and the frequency of the video adapter.

zCompare these values with the data in the Preset Timing Modes Chart.

zCheck if the signal cable is securely connected. Connect it again securely.

(Refer to Connecting to a Computer)

zRun Frequency Coarse and Fine tuning.

zTurn on again after removing all accessories (video extension cable, etc.)

zSet resolution and frequency to the recommended ranges.

zCheck if the resolution and frequency set for the computer video card falls in the range supported by the monitor.

If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.

zadjust the brightness and contrast. (Refer to the Brightness, Contrast)

zAdjust color using Custom under OSD Color Adjustment menu.

zThe monitor is currently saving the changes made in settings to the OSD memory.

zThe monitor is using its power management system.

zPress a key on the keyboard.

zIf you see the "TEST GOOD" message on the screen when you press the MENU button, check the cable connection between the monitor and the computer to ensure that the connector is properly connected.

3. Problems related to Audio

Problems related to audio signals and their solutions are listed below.

Problems

Solutions

No sound

z Ensure that the audio cable is firmly connected to both the

 

audio-in port on your monitor and the audio-out port on your

 

sound card.

 

(Refer to the Connecting the Monitor)

zCheck the volume level. (Refer to the Volume)

Sound level is too low.

z

Check the volume level.

 

 

(Refer to the Volume)

 

z

If the volume is still too low after turning the control to its

 

 

maximum, check the volume control on the computer sound

Page 57 Page 59
Image 58
Page 57 Page 59
Contents SyncMaster 320P Notational PowerDo not use a damaged or loose plug Do not drop the monitor when moving it InstallationInsert the power plug firmly so that it does not come loose Use only a properly grounded plug and receptacleSet down the monitor carefully Keep any heating devices away from the power cableDo not place the product on the floor Do not place the monitor face downClean Do not spray water or detergent directly on the monitorOthers Do not remove cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsFalling product could cause physical damage even death Page This stand is not for the Floor Standing Type Monitor Manual Quick Setup GuideUnpacking CableSub Cable Power Cord BNC to RCA Semi StandFront DVI Inhdcp PC Video Connection Terminal RearPC Inrgb PC Video Connection Terminal Page For using a locking device, contact where you purchase it Remote ControlKensington Lock Mute MagicnetLock AutoStill Play/Pause Fast forward Mechanical Lay-out Monitor Head Stand Speaker Installation Vesa Bracket How to assemble the Wall Mount Bracket ComponentsSold separatelyPage Installing Stand Kit Installing the Semi Stand Left standInstalling Stand Kit sold separately Case of Power cord with EarthConnecting to a Computer Connecting to a VCR Connecting to a DVD PlayerConnecting a Camcorder Connecting DTV Set Top BoxConnecting Speakers Connecting to an Audio System IntroductionMain Screen Beginning Port Setting Power Control Page Page Page PIP Control PIP Source Page Page Page Page Page Page Settings Value Display In Multiple Display Mode Natural Color Software ProgramHow to install the Natural Color software Description Play When external A/V devices such as VCRs or DVDs areOSD Those devices in a small window super-imposed on the PCAvailable Mode PIP Swap Direct button on the remote control is Swap buttonSize Direct button on the remote control is Size button PC / BNC /DVI ModeAdjust the Brightness Direct button on the remote control is M/B button EntertainAdjust the Contrast Description Play MagicBrightCoarse Adjusts the screen location horizontally and verticallyAV / S-Video / Component Mode FineDirect button on the remote control is P.MODE Description Play ModeYour personalized picture settings FactoryThis monitor supports the DNle feature by default Off SoundBBE Off Timer Sleep TimerOn Timer DescriptionThis function is not available when the power is turned off When Video Wall is running, the PIP, Auto AdjustmentLaunching Video Wall while PIP is running, will switch Video Wall~5 Seconds ID SetupSecond OSDDescription Move to the Multi Control OSD screen Set the Safety Lock function MDC Lock OnSelf-Test Feature Check Self-Test Feature CheckNot Optimum Mode Problems related to Installation Maintenance and CleaningSymptoms and Recommended Actions Problems related to ScreenNo sound Problems related to AudioScreen is blank and is blinking Sound level is too lowHow can I set the Power Saving function? Remote control buttons do not respondHow can I clean the outer case/LCD Panel? General LCD PanelPowerSaver Dimensions WxHxD/ WeightPreset Timing Modes Preset Timing ModesService Hungary FranceGermany ItalySouth Africa PeruPortugal SWEDEN/DENMARK/NORWAY/FINLANDTerms For Better DisplayAuthority Class BProduct Information Image Retention Free
Related manuals
Manual 70 pages 62.05 Kb
Top Page Image Contents