Samsung 320P manual PowerSaver, Dimensions WxHxD/ Weight

Page 61

Power Consumption

Less than 180W

Power Saving

Less than 5W

Dimensions (WxHxD)/ Weight

780 X 482 X 107 mm / 30.1 X 19.0 X 4.6 inch / 16.1kg

780 X 530 X 223 mm / 30.1 X 20.9 X 8.8 inch (With Stand) - Option

982 X 482 X 107 mm / 38.7 X 19.0 X 4.2 inch (With Speaker) - Option

982 X 530 X 223 mm / 38.7 X 20.9 X 8.8 inch (With Speaker, With Stand) - Option

VESA Mounting Interface

200mm x 200mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

 

Operating

Temperature: 50°F ~ 104°F (10°C ~ 40°C)

 

Humidity: 10% ~ 80%, non-condensing

Storage

Temperature: -4°F ~113°F (-20°C ~ 45°C)

 

Humidity: 5% ~ 95%, non-condensing

Audio Characteristics

 

Audio Input 1

RCA Jack Red(R) White(L), 0.5Vrms (-9dB)

Audio Input 2

RCA Jack Red(R) White(L), 0.5Vrms (-9dB)

PC Audio Input

3.5ØStereo Jack, 0.5Vrms (-9dB)

Frequency

RF: 80Hz ~ 15kHz (at -3dB)

Response

A/V: 80Hz ~ 20kHz (at -3dB)

Plug and Play Capability

 

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.

zFor example, the number of TFT LCD sub pixels that is contained in this product are 3,133,440.

Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

 

 

Power saving

Power off

Power off

State

Normal Operation

mode

(Mechanical Power

(Power Switch)

 

 

EPA

S/W)

 

 

 

Power Indicator

Green

Green, Blinking

Black

Black

Power Consumption

Less than 180W

Less than 5W

Less than 1W

Less than 0W

(Off-mode)

(at 120Vac)

 

 

 

Image 61
Contents SyncMaster 320P Notational PowerDo not use a damaged or loose plug Insert the power plug firmly so that it does not come loose InstallationDo not drop the monitor when moving it Use only a properly grounded plug and receptacleDo not place the product on the floor Keep any heating devices away from the power cableSet down the monitor carefully Do not place the monitor face downDo not spray water or detergent directly on the monitor CleanDo not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetFalling product could cause physical damage even death Page Unpacking Monitor Manual Quick Setup GuideThis stand is not for the Floor Standing Type CableBNC to RCA Semi Stand Sub Cable Power CordFront DVI Inhdcp PC Video Connection Terminal RearPC Inrgb PC Video Connection Terminal Page For using a locking device, contact where you purchase it Remote ControlKensington Lock Lock MagicnetMute AutoStill Play/Pause Fast forward Mechanical Lay-out Monitor Head Stand Speaker Installation Vesa Bracket ComponentsSold separately How to assemble the Wall Mount BracketPage Installing the Semi Stand Left stand Installing Stand KitCase of Power cord with Earth Installing Stand Kit sold separatelyConnecting to a Computer Connecting to a DVD Player Connecting to a VCRConnecting DTV Set Top Box Connecting a CamcorderConnecting Speakers Introduction Connecting to an Audio SystemMain Screen Beginning Port Setting Power Control Page Page Page PIP Control PIP Source Page Page Page Page Page Page Natural Color Software Program Settings Value Display In Multiple Display ModeHow to install the Natural Color software OSD When external A/V devices such as VCRs or DVDs areDescription Play Those devices in a small window super-imposed on the PCSize Direct button on the remote control is Size button Swap Direct button on the remote control is Swap buttonAvailable Mode PIP PC / BNC /DVI ModeAdjust the Contrast Direct button on the remote control is M/B button EntertainAdjust the Brightness Description Play MagicBrightAV / S-Video / Component Mode Adjusts the screen location horizontally and verticallyCoarse FineYour personalized picture settings Description Play ModeDirect button on the remote control is P.MODE FactorySound This monitor supports the DNle feature by default OffBBE On Timer Sleep TimerOff Timer DescriptionLaunching Video Wall while PIP is running, will switch When Video Wall is running, the PIP, Auto AdjustmentThis function is not available when the power is turned off Video WallSecond ID Setup~5 Seconds OSDDescriptionMDC Set the Safety Lock functionMove to the Multi Control OSD screen Lock OnSelf-Test Feature Check Self-Test Feature CheckNot Optimum Mode Symptoms and Recommended Actions Maintenance and CleaningProblems related to Installation Problems related to Screen Screen is blank and is blinking Problems related to Audio No sound Sound level is too lowHow can I set the Power Saving function? Remote control buttons do not respondHow can I clean the outer case/LCD Panel? LCD Panel GeneralDimensions WxHxD/ Weight PowerSaverPreset Timing Modes Preset Timing ModesService Germany FranceHungary ItalyPortugal PeruSouth Africa SWEDEN/DENMARK/NORWAY/FINLANDFor Better Display TermsClass B AuthorityProduct Information Image Retention Free
Related manuals
Manual 70 pages 62.05 Kb