Universal Remote Control R6 manual Please do not Return

Page 13

STEP 4: Once you have found the right code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on.

Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new code. Continue pressing the UP (or DOWN) arrow button until you find a new code that turns off the component and makes the VOLUME or PLAY buttons respond correctly.

STEP 5: Once you have found the right code, you must save it. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored. Now when you press the TV component but- ton, all of the buttons will work with your TV.

Repeat the above five steps for other components.

NOTE: Use this method for those components you cannot program with either the Quick Set-Up or 3-digit Code Entry Methods.

IMPORTANT: If you cannot find the right code after 5 minutes of trying the Auto-Search Method, try the Learning Method (page 14).

PLEASE DO NOT RETURN

THIS PRODUCT TO THE STORE

PLEASE CONTACT OUR TECHNICAL

SUPPORT CENTER . IF YOU NEED ASSISTANCE E-MAILtechsupport@UniversalRemote.com or dial 1-800-901-0800(9:00AM - 6:00PM EST)

UNIVERSAL

remote control

www.universalremote.com

THANK YOU

UNIVERSAL REMOTE CONTROL, INC

500 Mamaroneck Avenue

Harrison, New York 10528

(914) 835-4484 U.S.A.

Page 13

Image 13

Contents Page Universal Table of Contents Pre-Programmed Code Tables FAQs Warranty SpecificationsControl up to 6 Components Getting Started OverviewComponent Buttons TV ButtonLow Battery Warning Battery InstallationCouch Mode Insert Batteries CorrectlyMacroPower & Other Macro Buttons Special Advanced Features‘My Favorites’ Favorite Channels SimpleSound & Other ‘Punch Throughs’Keypad Layout & Button Functions Quick Set-Up Method Programming Avex R6 using Pre-Programmed CodesComponent Buttons Number PAD Component Buttons Select Three-Digit Code Set-Up MethodNumber Buttons Arrow Down Auto-Search MethodPlease do not Return Programming Avex R6 Using the Learning Method Page Finding a Component’s Set-up Code Number AUX Function Programming 6th ComponentComponent Buttons Select Info Programming Multi-Commands to Macro Buttons Programming Special Advanced FeaturesMacroPower Total System On/Off Power MuteChannel Power Component ButtonsPage Mute Button Programming ‘My Favorites’ Favorite Channel ButtonsSimpleSound Total System Volume Control Repeat Steps 1-2 for all other components Component Buttons Select Channel Channel Control ‘Punch Through’Component Buttons Select Play Transport Control ‘Punch Through’Component Buttons Menu Select OSD On-Screen Display Control ‘Punch Through’Erasing a Single Learned Command from One Component Erasing Commands OverviewComponent Buttons Enter Component Buttons Pause Enter Erasing All Learned Commands from One ComponentChannel Mute Erasing MacroPower & Other Macro CommandsComponent Buttons Select Volume Erasing SimpleSound & Other ‘Punch Through’ CommandsSAT/CABLE Component Button Record Factory ResetPre-Programmed Code Tables CABLE/SAT Abex Sceptre DVR/VCR Humax DVD Audio AUX If the batteries run out, will I lose my settings? Frequently Asked QuestionsWhat is MacroPower? What if my remote control no longer works from a distance?Specifications USA Limited Warranty