6.Press ENTER to confirm the setting.
CHANGING THE HOUSE CODE:
The Remote defaults to House Code A, and in most cases you will not need to change this unless you are experiencing interference from a neighboring Home Control system.
1.Press and release the button with the House symbol on it.
2.Press and hold SETUP until the LED
indicator lights steadily. Release Setup button.
3.Use the number buttons to enter the number equivalent to the chosen House Code (1=A, 2=B ..16=P).
4.Press the ENTER button to confirm the House Code. The LED turns off.
NOTE: The House Code you choose must match the House Code on the Transceiver and Modules you are using it with.
14