USING AUX TO CONTROL A SECOND TV, VCR, CABLE BOX OR SATELLITE RECEIVER
The AUX button is normally used to control an audio component, but it can also be configured to control a second TV, VCR, cable box or satellite receiver.
1. Turn on the equipment you want to control.
2.Press and hold SETUP until the LED indicator lights steadily. Release Setup button.
3.Press the AUX1 or AUX2 button.
4.Press and release the mode button that matches the A/V equipment you want to control. The LED blinks once.
5.Enter the 3 digit Code from the Code List. The LED turns off after the last digit entered.
6.Point the remote at your audio component and press the POWER button. Your audio component should turn off.
7.Turn your audio component on and press CHANNEL +. If it responds, setup is complete.
9