Scientific Atlanta 15-100 manual Programming MY System Mode, Using Learning, Learning Precautions

If the default settings fit your needs, you can skip programming this mode. Otherwise, perform the steps in the following section to assign device modes to the Control Groups.

PROGRAMMING MY SYSTEM MODE

1.Press and hold P until the LCD displays

	Code Set OK or	. Use the
	keys to scroll through the LCD until My
	System OK or	is displayed.
	Press OK.
2.	The LCD displays Channel OK or . Press OK.
3.	The LCD displays Press Mode or .

4.Press the mode key for the device you want to control the channel (for example, TV). The LCD

	displays Success TV.
5.	The LCD displays Volume OK or . Press OK.
	Press the mode key for the device that you want to
	control volume (for example, AUDIO). The LCD
	displays Success.
6.	The LCD displays Transport OK or . Press OK.

7.Press the mode key for the device you want to

control transport (for example, VCR). The LCD displays Success VCR.

8. The LCD displays Menu Nav OK or . Press OK.

9.Press the mode key for the device you want to

control menu navigation (for example, CBL/SAT). The LCD displays Success SAT.

10.When programming is complete, the LCD displays Complete and exits the My System setup.

USING LEARNING

The RadioShack 8-in-1 LCD Remote includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down). However, there are some considerations.

Learning Precautions

•Your original remote controls must be in working order for learning to work properly.

•Learned keys are mode-specific, so each one can store a unique function for each mode.

•Learning capacity is approximately 34 to 50 keys, depending on the code being learned.

•Some keys cannot be learned: Mode keys (for example, TV), P, and the Light bulb key.

•Certain device functions are not learnable, including multi-frequency types, some high frequency ones, and other unusual formats.

16