To set the Power macro:
1.Press and hold P until the LCD displays
Code Set OK or .
2. Use the or keys to scroll through the
LCD display until Macro is displayed. Press OK.
3.The LCD displays PWR Macro. Press OK.
4.The LCD displays Add Macro. Press OK. The LCD
displays Press Mode IN or | . |
5.Press the mode key for each device you want to add
to the power macro in the order they should
execute when the macro is activated.
6. The LCD displays Hold P to save or after the first mode key is pressed.
7.After entering the modes, press and hold P until the LED blinks twice, then release. The LCD
displays Success.
Now, when you press and hold the Power key for about 2 seconds, the remote executes the series of commands you entered.
NOTE: You may not include the user keys in the Power macro. User keys are any key other than the mode keys.
To Clear the Power Macro
To clear the Power macro, repeat steps
1.The LCD displays Add Macro.
2. | Press | until the LCD displays DLT Macro. |
| Press OK. |
|
3. | The LCD displays Are u sure OK or . Press OK. | |
| The LCD displays Success and the remote exits. |
SETTING KEY MACROS
Your RadioShack
To set a key macro, perform the following steps:
1.Press and hold P until the LCD displays
| Code Set OK or | . |
|
2. | Use the or keys to scroll through the |
| |
| LCD display until Macro is displayed. Press OK. | ||
3. | The LCD displays PWR Macro. Press | until the | |
| LCD displays Key Macro OK or | . Press |
OK.
4.The LCD displays Add Macro. Press OK.
5. The LCD displays Sel Macro Key or . Press the key you want to program the macro on.
NOTE: Any function key like M1, M2, or M3, other than EXIT or can be a macro key.
21