•For optimum learning, avoid high levels of ambient light such as natural sunlight or
NOTE: Please have your original remote controls handy before programming learning.
Programming a Learned Key
1.Press and hold P until the LCD displays
| Code Set OK or | . Use the |
| keys to scroll through the LCD display | |
| until Learn is displayed. Press OK. | |
2. | The LCD displays Add Learn OK or . Press OK. | |
3. | The LCD displays Press Mode or . |
4.Press a mode key once (i.e., TV, VCR , PVR, CBL/SAT, CD, DVD, AUX, or AUDIO) to assign a mode to learn onto.
5.Place the RadioShack
2"
6.Press the key on your RadioShack
7.On the original remote, press and hold the key. Continue holding the key on the original remote
until the RadioShack
NOTE: Immediately after you have pressed the key
that will learn, the LED flashes rapidly and the LCD displays Learning. The remote times
out after five seconds and returns to step 6.
8.Repeat steps 4 through 7 for another mode and/or key or press EXIT to exit programming. Repeat steps 5 through 7 if learning failed.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 17).
1.Press and hold P until the LCD displays
Code Set OK or | . Use the | |
keys to scroll through the LCD display | ||
until Learn is displayed. Press OK. | ||
2. Use the | keys to scroll through the |
LCD display until Dlt Learn is displayed. Press OK.
17