1 Press TAPE A/B repeatedly to select deck A or B.
2 Press Z and insert a recorded tape in deck A or B.
With the side you want to play facing forward
3 Press DIRECTION repeatedly to select g to play one side. Select
jto play both sides.
To play both decks in succession, select RELAY (relay play).*
4 Press nN.
Press nN again to play the reverse side. The tape starts playing.
Forward indicator
Reverse Tape indicator presence
indicator
*Relay Play always follows the following sequence: t Deck A (front side) t Deck A (reverse side) 
Deck B (reverse side) T Deck B (front side) T
To | Do this |
Stop play | Press x. |
Pause | Press X. Press again to |
| resume play. |
|
|
Turn SHUTTLE clockwise until | |
| it clicks (or press M on the |
| remote) while playing the front |
| side or counterclockwise until |
| it clicks (or press m on the |
| remote) while playing the |
| reverse side. |
|
|
Rewind | Turn SHUTTLE |
| counterclockwise until it clicks |
| (or press m on the remote) |
| while playing the front side or |
| clockwise until it clicks (or |
| press M on the remote) |
| while playing the reverse side. |
|
|
Remove the cassette | Press Z. |
|
|
Adjust the volume | Turn VOLUME (or press |
| VOL +/– on the remote). |
|
|
Tips
•The deck stops automatically after repeating the sequence five times.
•When you want to reduce the hiss noise in low- level
•When no tapes are inserted, all indicators light. When a tape (tapes) is (are) inserted, corresponding presence and forward/reverse indicators light.
Searching for the beginning of a track (AMS*)
During playback, press . or > repeatedly for the number of songs you want to skip forward (or backward).
The search direction, + (forward) or – (back), and number of songs being skipped (1~9) appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the following circumstances:
–When the unrecorded space between songs is less than 4 seconds long.
–If completely different information is recorded on the left and right channels.
–When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax).
–When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.)
Basic Operations
17