Scientific Atlanta EXPLORER 2000 manual How to Install the Bypass Module

Optional Features, Continued

How to Install the Bypass Module

The EXPLORER 2000 provides a bypass feature that allows you to view an analog channel while recording a digital (or analog) channel on your VCR.

1. Bend the metal tab to the
Bypass connection toward you,
then pull the tab off to prevent it				CABLE IN
			CABLE			RISK
from falling into the EXPLORER
						OF ELECTRICAL SHOCK	CAUTION
			OUT		DO NOT OPEN
2000.				BYPASS
2. Hold the Bypass module				1
with the connector				2
labels facing right
side up and				3
toward you.	MODEL E2051-X01
Insert the
	TO
multi-cable	TV
	FROM	CABLE
connector	VCR	INPUT
on the	Bypass Module			Bypass Module
Bypass
	(Outside View)			(Inside View)		T6431
module into
the Bypass connection on the EXPLORER 2000.

3.Insert the Cable In connector on the Bypass module into the Cable In connection on the EXPLORER 2000 unit. The multi-cable connector folds into the inside of the Bypass module.

	4. Align the mounting tabs on
	the Bypass module with	VCR			TV	Cable Input
	the screw holes on the	OUT TO	IN TO		OUT TO	From Wall
	EXPLORER 2000 back	TV	VCR	5	TV
	panel, then finger tighten the
	screws (supplied with the
	Bypass module) to hold the
	module in place against the			MODEL E2051-X01
				CABLE IN
			TO			RISK
	back panel.	CABLE
		OUT	TV			CAUTION OFELECTRICAL SHOCK DO NOT OPEN
				4
			FROM		CABLE
	5. Connect your TV and VCR		VCR		BYPASSINPUT
	to the Bypass module as
	shown.					T6432
1 3	EXPLORER 2000 User’s Guide					565069 Rev B