How to Program the Remote Control, Continued
To Program for Volume Control
You can program the remote control to control the volume and mute functions through the EXPLORER 2000, or through your TV.
1.Point the remote control away from the EXPLORER 2000, the TV, and the VCR.
2. Press and hold | and | at the same time until the LED on the |
remote control blinks twice.
3.Using the remote control keypad enter 993. The LED on the remote blinks twice.
4.Press 
or 
, depending on which device you want to control the volume. The LED on the remote control blinks twice to confirm a valid selection.
5.Point the remote toward the device on which you chose to control the volume, and adjust the volume to confirm operation.
565069 Rev B | EXPLORER 2000 User’s Guide |