How to Program the Remote Control, Continued
To Program for VCR Operation
You can program the EXPLORER 2000 remote control to play video tapes. If you want the EXPLORER 2000 to manage the recording of events with your VCR, you must use the VCR Commander™ module. Without this module, you must manually program your VCR to record. See the VCR Commander™ User’s Guide for more information or ask your cable company.
Make sure your VCR is
1.Locate the VCR setup code in the tables on the pages that follow. If your VCR is not listed, see Searching the Code Library.
2.Point the remote control away from the EXPLORER 2000, the TV, and the VCR.
3. On your remote control, press and hold | and | at the same time |
until the LED on the remote blinks twice.
4.Using the remote control keypad, enter your VCR’s
5.Confirm by pointing the remote control toward the VCR and test the Power, Play, and Stop functions. If these functions do not operate from the remote control, enter the next VCR setup code in the list by repeating this procedure from step 1.
Note: The slide switch must be in the VCR mode to test the remote control’s VCR functions.
Note: The slide switch on the remote control must be in the VOD position in order for the Record and Stop features of the VCR Commander to work with the remote control.
Continued on next page
EXPLORER 2000 User’s Guide | 565069 Rev B |