Toshiba TW56D90 To cancel the learned operating codes, Head to head, Off after blinking

Page 18

I UsingINTRODUCTION the Remote Control

(continued)

• This Remote Control is capable of learning operating codes from most infrared remote

control transmitters. You can control the functions of your TV and a variety of video/

audio equipment with the supplied Remote Control only.

• The 31 buttons can be used as Learning buttons. (See page 13.)

To learn operating code of another remote control

Set the Mode selection switch to AUX.

2 Set the LEARN-USEswitch to LEARN.

LEARN _

USE

Place the supplied Remote Control and the remote

control transmitter to be learned, head to head

approximately 1 to 3 inches (3 to 8cm) apart.

 

 

Head to head

 

_

4

.....O_ /_);-3 inches apar_ I

-00"0'0

Supplied

Remote Control

Remote to be learned

Hold down the button to learn on the supplied Remote Control for about 1 second until the

LEARN indicator lights up.

Note:

When you press a button other than Learning button, the indicator will blink. For specific Learning buttons in specific modes, see the table "To operate desired equipment" on page 14.

Hold down the function button to be learned on the remote control transmitter for about 3 seconds

until the LEARN indicator goes off.

Set the LEARN-USE switch to USE.

7

if

LEARN _USE

To check your programming, operate the appropriate equipment with the supplied Remote Control. If the equipment does not operate as expected, repeat steps 1 to 7.

If needed, try changing the distance between the two remote controls.

9 Attach the supplied template to the Remote Control to enter the function names of the AUX buttons you have programmed.

Use a ballpoint pen etc. to write the function names.

[(_(230LUHE (_3

To cancel the learned operating codes

1 Set the Mode selection switch to AUX.

2 Set the LEARN-USE switch to LEARN.

3 Hold down the button of the function to cancel on the Remote Control for about 1 second until the LEARN indicator lights up.

Hold down RECALL and RESET at the same time for about 6 seconds until the LEARN indicator goes

off after blinking.

Note:

Note:

You

cannot

cancel

the programming

if you release

If the LEARN indicator goes off after blinking, the

the

button

while

the

indicator

is blinking.

supplied Remote Control cannot learn the

5 Set the LEARN-USE

 

 

 

operating code or an error has occurred. Try steps

switch to

USE.

 

4 and 5 again.

 

Repeat steps 4 and 5 for other function keys.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Projection Television Picture Safety PrecautionsExciting PleaseTable of Contents InstallationINTRODUCTION Where to installPower Supply Remote Control Mounting position ConneconDo not stand or climb on the TV Finish with a dry clothConnection Types of antenna cablesAntenna connection panel Single lead-in cable Both VHF and UHF lead-in cablesRefer to Caution on Cable without a decoder box Unscrambled channels Cable with a decoder box Unscrambled and Scrambled channelsScrambled channels from the decoder box will Using a 2-way signal splitter Antenna/Cable 73/connection via VCR Simplified methodVCR U/V separated VIDEO/AUDiO VolumeChannel V/A Video Input Balance ANT/VIDEOHannel A/V TV/VIDEORecall SlowAUX Do not drop, dampen or disassemble the Remote ControlCable Tips for best operationRemote Control when you change its batteries VCR Code Cable CodeVCR code table Brand Name Code NumberCable TV converter code table STSHead to head To cancel the learned operating codesTo learn operating code of another remote control Off after blinkingMenu button QuickINTRODUCTIONReference Menu GuideADV button CH CaptioinPicture button SET UP buttonExit button on the TV and on the Remote Control Udio buttonANT/VIDEO Last Mode MemoryAuto-Power-Off VideoUsing the ANT1/2 button on the Remote Control Using the ANT/VIDEO button on the TVAntnideo To program all available channels automatically MenuPress or + to start autoprogramming Tuning band and Receivable channels STD Cable HRC Cable IRC CableTo change the tuning band for the small picture PIP/POP AAABBB To erase unnecessary channels Until ADD.ERASETo add channels To check and align the colors Light blueWatching TV Programs To select a channel directlyThea TEn Wide Wide Size is displayed on Screen in magenta To adjust the height of the picturePress PIC, Size to select Theater Wide mode Theater WIDE1To adjust the vertical position of the picture Press PIC. Size to select Theater Wide modeTo return to the previous channel viewed FunctionsTo display on-screen information RecallBrightness To adjust the picture qualityReset Menu ADV SharpnessFlesh tone function Flesh Tone To deactivate this functionReset button SettingTo select the picture preference Bass RESET/+ Menu ADVIf you want to adjust any other item TrebleAudio menu on the screen BroadcastsListening To stereo sound Listening to the second languageEffects of each DSP mode To activate the appropriate DSP modeSound Effect Press DSP repeatedly until your desired mode is displayed To select Dolby Pro Logic SurroundTo deactivate the DSP function MJIIoLddP-o To adjust the Input Balance control Dialogue leakage coming from the left and right speakersTo select the Dolby Pro Logic Test mode System ON/OFF mode display shown at the right Source PIP-POP PIP CH PowerTo display a TV broadcast picture as a small picture Or Video 3 for the small pictureLocate Still To switch the maM and small pictureTo change the position of the small picture To freeze the small pictureTo cancel the channel search function Press CH Search again CH Search functionSearch Two-PictureADVANCED OPERATIONScreen To adjust the contrast of the small pictureReset MenuTo set the OFF timer To cancel the OFF timerClock Each To set the clockTime To monitor the time Press RecallFrench LanguageEnglish SpanishTo start the auto demonstration To stop the demonstrationWhen you turn the TV on 3D-YoC SeparationCaptioning BlankButton To clear the captioning Select the channel which has the caption you want to eraseClear SETSET Pick a number that is easy to rememberCorrect code again To restore channelsIf a wrong code has been entered If you want to know the channels you have locked outTo view captions To view text CaptionConnections Rear Speaker Video Video Faudioi Mono RVariable Audio VIDEC/AUDIO OutputAntenna or Cable lead-in To select video input sourceSelected source will be displayed in magenta I. ,I ir, lhllVLll i,,u 11,i.l, lhllVl I eei Source selecting mode IN-VIDEOIoxom.YJr,l,J .nJoIl, mnn, nL,,,t.svzeli To connect equipment for dubbing/editingBass To disconnect the built-in speakersAudio SpeakersSpeaker positioning Main Speaker EXT INTTV/VCR Bass TrebleContrast TintTelevision System Limitedadditional Unitedreferencestates Warranty America Consumer Products INC

TW56D90 specifications

The Toshiba TW56D90 is a notable addition to Toshiba's line of high-definition televisions, blending cutting-edge technology with user-friendly features for a comprehensive viewing experience. This TV model is renowned for its impressive screen size and resolution, making it a favored choice among home entertainment enthusiasts.

One of the standout features of the TW56D90 is its 56-inch screen, which offers a substantial viewing area that enhances the immersion of movies, sports, and video games. The television boasts a high-definition resolution, ensuring that images are vibrant and crisp. This clarity is further enhanced by Toshiba's advanced picture processing technology, which optimizes color reproduction and contrast to deliver stunning visuals.

The TW56D90 incorporates Toshiba's proprietary image enhancement technologies, such as ClearFrame and DynaLight. ClearFrame technology significantly reduces motion blur, allowing fast-paced scenes to be displayed smoothly, which is particularly beneficial for action movies and sporting events. DynaLight adjusts the backlight according to the content on display, improving the overall contrast and brightness of the screen for an enriched viewing experience.

Audio quality is also a significant consideration for the TW56D90. The television is equipped with high-quality speakers and digital audio processing, ensuring that sound complements the visual experience. Users can expect clear dialogue and rich sound effects, making for a more immersive experience overall.

For connectivity, the TW56D90 offers multiple HDMI ports, allowing users to connect a variety of devices such as gaming consoles, Blu-ray players, and streaming devices easily. Additionally, it includes USB ports for direct media playback, enabling viewers to enjoy their favorite movies and music without the need for external devices.

User interface and smart features also contribute to the television's appeal. The TW56D90 features an intuitive menu system, making navigation user-friendly for all ages. While it may not be a fully integrated smart TV, it supports various connection options for external streaming devices, leveraging widely-used apps.

In summary, the Toshiba TW56D90 combines a large display, high-definition resolution, advanced picture technologies, and robust audio performance, making it an excellent option for anyone looking to enhance their home theater setup. Its user-friendly design and connectivity options further solidify its position as a strong contender in the market of televisions.
Top Page Image Contents