Toshiba TW56D90 owner manual Mounting position, Connecon

I InstallationINTRODUCTION (continued)

•The Surround Speakers are packed in a separate box inside this container. Unpack the Speakers carefully and set them up as shown below.

Connec_on

Connect one end of the speaker cable to the

terminals on the Surround Speaker.

TV rear

2 Connect the other end of the speaker cable to the "REAR SPEAKER" terminals* on the TV rear panel. While depressing the button, insert the cable. Then, release the button.

3 o) o E

2 3

Mounting position

*Note:

The REAR SPEAKER terminals can be used only for the supplied speakers.

Do not connect any other speakers to these terminals.

Connect another speaker following steps 1 and 2 above.

To enjoy the sound of the DSP Surround or Dolby Pro

Logic Surround features, you must mount the speakersII to the left and right, on a shelf or on a wall behind your

normal viewing position. See page 39 for details.

Note;

You can get the best surround performance when you install the speakers slightly above your viewing position while watching TV.

CAUTIONS

•If the speakers are mounted on a wall, hang them from the opening provided on their back panels.

•Care should be taken when choosing speaker

mounting hardware to insure compatibility		with the	L speaker	R speaker
material of the wall. Do not use mounting hardware
with thin and/or soft wall materials,	as the	speaker
may fall and cause personal injury	or be damaged.

6