Toshiba TLP-S10 owner manual Using handy features, Zooming out the images

Using handy features

■Using auto setting (Auto setting)

■Correcting the keystone distortion (Keystone)

This function sets up the projector to the optimum state for

each type of the input signal by using simple operations. Control panel

Remote

Control

When the foot adjuster p.23 is used to change the projection angle, the picture will undergo keystone (trap-

Remote

1	Press the AUTO SET button.
2	The Auto setting menu appears.
	Press the AUTO SET button again.

FAN TEMP LAMP ON

INPUT	ON / STANDBY
	ZOOM+
	MENU
VOL. -	VOL. +

ON/

CALLSTANDBY

KEYSTONEAUTOSET

MUTE FREEZE

RESIZE

ezoidal) distortion.

This projector is capable of correcting this keystone distortion.

Before correction After correction

Control panel

FAN TEMP LAMP ON

INPUT ON / STANDBY

ZOOM+

Control

ON/

CALLSTANDBY

KEYSTONEAUTOSET

MUTE FREEZE

The menu item is automatically adjusted/set.
For computer input, the	icon will appear during
processing.

KEYSTONE	AUTO SET
	ZOOM-

CANCEL

INPUT

	MENU
VOL. -	VOL. +
KEYSTONE	AUTO SET
	ZOOM-

RESIZE

CANCEL

INPUT

Note

•Auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.38 , p.39 .

●Manual adjustment and setting

The menu items vary depending on the input type, as shown in the table below.

Use the buttons to adjust the items in the table below, then press the button when you are finished. The menu disappears. (The CANCEL button on the remote control also allows you to exit the menu mode.)

Input	Item		Description
Computer	Phase	Adjust with	to eliminate flicker.
	Frequency	Adjust with	to eliminate periodic patterns and
Item		flickering when many vertical lines appear on the screen.
	H-position	Move left	Move right
Select
	V-position	Move up	Move down

Clamp 1 Adjusts the clamp pulse position with or .

1Press the KEYSTONE button.

The Keystone menu appears.

2Use the buttons for keystone adjustment.

On completing the adjustment, press the button to dismiss the menu (you can also use the CANCEL button on the remote control for menu dismissal). The trapezoidal distortion will be

automatically corrected. During the processing, the icon is displayed.

Item	Description
Keystone	Shrink button of the screen	Shrink top of the screen

Notes

•Depending on the amount of keystone adjustment and the content of images, some information may be lost, or the picture quality may suffer.

•Keystone adjustment will not change the shape of the menus.

■Zooming out the images

This equipment is provided with the digital zoom (electric zoom: 100-80%). (Note that the display, if digitally zoomed out, may suffer from some degradation.)

Operations

Clamp 2 Adjusts the clamp pulse width with or .

Y/PB/PR		Phase	Adjust with		to eliminate flicker.
		Signal format	[	: Enter to setting mode]		[	: Select one
	Item		of the following]		[Apply:	]
			480i(525i)@60Hz/480p(525p)@60Hz/
	Select
			576i(625i)@50Hz/576p(625p)@50Hz/
			720p(750p)@60Hz/720p(750p)@50Hz/
			1080i(1125i)@60Hz/1080i(1125i)@50Hz/
			1035i(1125i)@60Hz/1152i(1250i)@50Hz
Video		Video mode	[	: Enter to setting mode]		[	: Select one

1 Press the ZOOM – button.

Each time the ZOOM – button is pressed, the

image is reduced in size.

2 Press the ZOOM + button to bring it back

to the original size.

Control panel

FAN TEMP LAMP ON

INPUT	ON / STANDBY
	ZOOM+
	MENU
VOL. -	VOL. +
KEYSTONE	AUTO SET
	ZOOM-

Remote Control

RESIZE

CANCEL

INPUT

ZOOM+

VOL.- MENU VOL.+

ZOOM-

S-video	of the followings] [Apply: ]
	NTSC/PAL/SECAM/PAL-N/PAL-M/PAL60/NTSC4.43

Note

• Moving pictures generated with the DVD software for computers may appear unnatural if it is projected with this projector, but it is not a malfunction.

Each time the ZOOM + button is pressed, the

image size increases.

(You cannot make it larger than the original size.)

Notes

•Pressing either the ZOOM-

or ZOOM+ button would

display the icon.

•The adjustment value will automatically be saved.

24 25