Toshiba 19LV505C, 22LV505C owner manual Night Mode, Digital Out, Off, Bitstream

Setting details (continued)

Picture Mode

There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.

Auto: Select this selection normally.

The DVD player automatically detects source content, film or video of playback source, and converts that signal in an appropriate method.

Film: The DVD player converts film content pictures appropriately. Suitable for playback of film content pictures.

Video: The DVD player filters video signal and converts it appropriately.

Suitable for playback of video content pictures.

Note:

•Depending on the disc, pictures may be cut off or doubled. In this case, select “Video”.

JPEG Interval

You can continuously playback all JPEG files automatically.

After the selection below, the disc will start playback on JPEG files which have been recorded.

Off:

Plays back one file at a time.

5 Seconds:

Plays back images in the form of a slide show at 5 second intervals.

10 Seconds:

Plays back images in the form of a slide show at 10 second intervals.

15 Seconds:

Plays back images in the form of a slide show at 15 second intervals.

50S0301A.indb 59

NightEMenuParental.B.L.Mode	: OffEnglish
DigitalTVSubScreenitOuSet Password:Bitst4:3Engl		isreham
DisplayAudioO t ut	: OEInterlaceglish
Picture ModeDivX(R) VOD:Auto
JPEG Interval	: 5 Seconds
Screen Saver	: On

■Night Mode

Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

Off: It plays back at the recording level on the disc.
On: Loud sound such as explosion is toned down
slightly when played back. This is suitable when
it is connected to a stereo.
Note:	Function
• The level of Night Mode may differ depending on DVD
• This function works only when the disc recorded with
Dolby Digital is played back.
video disc.	setup
■ Digital Out
You can select the digital output sound format corresponding
to your system connection.
Off:
There is no sound output from DIGITAL AUDIO OUT
jack.
PCM:
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo
amplifier.
Bitstream:
Disc audio bitstream data will be output.
Note:
• Even if you select “Bitstream”, MPEG Audio will be output
in PCM format.

59

2/5/08 5:59:22 PM