Toshiba 22LV505C Parental control setting, Set the new password, If you forget the password

Function setup

Customizing the function settings (Continued)

Setting details (continued)

ParentalEMenuDRC.B.L.	: OffEnglish
PasswordTVSubtitleQSoundScr en	: ChaEOn4:3g		he
		nglis
DivX(R)Audiosplay VOD	: OnDisplayEglish
Picture Mode	: Auto
JPEG Interval	: 5 Seconds
Screen Saver	: On

Parental control setting

Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit.

1)Press or to select “Parental”, then press ENTER. “Enter Password” screen will appear.

2)Press “0000” using Number buttons (0–9). (Please note, this is pre-setting password of this unit). Then press ENTER. The parental level list will appear.

•Level Off: The parental control setting does not function.

•Level 8: Virtually all DVD software can be played back.

•Level 1: DVD software for adults cannot be played back.

3)Press or to select from the level 1 to level 8. The limitation will be more severe as the level number is lower. Then press ENTER.

Note:

•Depending on the discs, the unit cannot limit playback.

•Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work.

•The password is required every time when you change the parental level.

•If you input a wrong number, press EXIT/CANCEL.

■Set the new password

1)Press or to select “Password”, then press ENTER. “Enter Current Password” screen will appear.

2)Press Number buttons (0–9)to input the current password (If the password has not been set yet after you purchase this unit, it is “0000”).

3)Then press ENTER. “Enter New Password” screen will appear. Press Number buttons (0–9)to input the new password.

4)Press ENTER. Now your new password has been set. Be sure to remember this number!

If you forget the password

1)Press EJECT to remove the disc.

2)While holding 7 down on the remote control and then press STOP on the unit. “Password Clear” appears on the screen. Now the password has been returned to the initial value (“0000”).

■DivX® VOD

In order to play DivX® VOD (Video On Demand) content on this unit, you first need to register the unit with your DivX® VOD content provider. You do this by generating a DivX® VOD registration code, which you submit to your provider.

Press or to select “DivX(R) VOD”. Then press ENTER. Your 8-character registration code is displayed. Make a note of the code as you will need it when you register with a DivX® VOD provider. Then press ENTER to select Done.

Note:

•If each setup (pages 58 ~ 60 ) has completed, the unit can always work under the same condition (especially with DVD discs).

Each setup will be retained in the memory even if you turn the power off.

60

50S0301A.indb 60

2/5/08 5:59:22 PM