Using the Remote Control
Controlling a TV
The VCRÔs remote is preprogrammed to control the basic functions of a compatible GE, RCA, or ProScan TV. The remote can also be set up to control other manufacturerÔs brands. To program the remote, enter the remote code number that corresponds to your brand.
Program the remote for a TV
1. Turn on the TV.
2. Point the VCR remote at the TV.
3. Hold the TV button and press the remote number button to enter the code for your brand. If the TV changes channels when you press CHANNEL up or down, setup is complete.
4. Release the buttons.
5. Repeat steps 2 – 4 with a different code if the first one does not work.
| Remote |
| Remote |
Brand | Button | Brand | Button |
|
|
|
|
Admiral | 1,6,9 | Panasonic | (CH Up) |
Akai | 6 | Philco | 6,8 |
AOC | 6 | Philips | 4 |
Centuricon | 9 | Portland | 8 |
Coronado | 8 | Prism | (CH Up) |
Curtis Mathes 1,9 | ProScan | 1 | |
Daytron | 9 | Quasar | (CH Up) |
Emerson | 6,8 | RCA | 1 |
Fisher | 5 | Sampo | 9 |
GE | 1 | Samsung | 8,9 |
Goldstar | 6,8 | Scott | 9 |
Hitachi | 0,8 | Sears | 1,5,7 |
JCPenney | 6,9 | Sharp | 8 |
KMC | 8 | Signature 2000 6,9 | |
KTV | 6,8 | Sony | 3 |
MGA | 9 | Sylvania | 4,9 |
Magnavox | 4,8,9 | Teknika | 4,8 |
Marantz | 6, (CH Dn) | Toshiba | 7 |
Mitsubishi | 6, (CH Dn) | Yorx | 9 |
NEC | 6,9 | Zenith | 2 |
|
|
|
|
*The remote may not be able to control every model TV of the brands listed.
Operate the TV
After you have set up your remote to control your TV, test the TV buttons to see which ones operate your TV.
1. Point the remote at the TV and press TV.
2. If TV does not turn on in step 1, press TV and then OFF.
3. Use the ÒTV Function ButtonsÓ as described on page 12.
Helpful Hint: Notice the difference between the TV and VCR
14