CONNECTIONS
Connection B
Very Good Picture and Sound Quality
To use this connection you must have:
•TV with separate RF and audio/video inputs (jacks)
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box.
1.Connect coaxial cables as shown.
2.Connect audio/video cables as shown.
To receive DSS® programming:
1.Tune TV to receive line output from DSS® receiver (often called Input 1).
2.Tune DSS® receiver to desired channel.
TV
DSS RECEIVER
VCR
IN
VIDEO R AUDIO L
SATELLITE
DISH
OUT TO TV |
|
|
|
IN FROM ANT CH4 | VIDEO R | SATELLITE IN | CABLE |
CH3 | L | OR | |
| AUDIO |
|
IN FROM ANT VIDEO IN AUDIO IN | |
CH3 |
|
CH4 |
|
R | L |
OUT TO TV
VIDEO OUT AUDIO OUT
To receive
1.Turn off VCR and DSS® receiver.
2.Tune TV to desired channel.
To receive off-air programming (with cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS® programming:
1.Tune TV to record line output from DSS® receiver (Input1).
2.Tune DSS® receiver to desired channel.
3.Set your VCR to record on DSS® output channel (CH3 / CH4).
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
CAUTION
Do not stack electronic components or other objects on top of the DSS® receiver. See Safety Information, inside front cover.
41