CONNECTIONS
Connection C
Good Picture and Sound Quality
To use this connection you must have:
•TV with RF input (jack)
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box.
1.Connect coaxial cables and audio/video cables as shown.
To receive DSS® programming:
•Tune TV to channel 3 or 4 (depending on how you set the CH3/CH4 switch on the back of the DSS® receiver).
TV
DSS RECEIVER
VCR
IN
|
|
|
| SATELLITE |
|
|
|
| DISH |
OUT TO TV |
|
|
|
|
IN FROM ANT |
|
| SATELLITE IN | CABLE |
CH4 | VIDEO R | L | OR | |
CH3 |
| |||
|
| AUDIO |
| |
|
|
|
|
IN FROM ANT VIDEO IN AUDIO IN
CH3
CH4
R L
OUT TO TV
VIDEO OUT AUDIO OUT
To receive
1.Turn off VCR and DSS® receiver.
2.Tune TV to desired channel.
To receive cable programming (with cable box):
1.Turn off VCR and DSS® receiver.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS® programming:
1.Tune TV to the channel on which you receive the DSS® signal.
2.Tune DSS® receiver to desired channel.
3.Set VCR to record on line input.
To view VCR programming:
1.Tune TV to VCR output channel (usually CH3 or CH4).
2.Turn DSS® receiver off.
CAUTION
Do not stack electronic components or other objects on top of the DSS® receiver. See Safety Information, inside front cover.
42