GE 24914 instruction manual Programming Your Remote, Direct Code Entry Recommended

Page 6

Programming Your Remote

Your GE universal remote control is designed to control multiple audio/video devices such as TV, DVD, DVR, satellite, cable and audio using only one remote. To use this remote, you will need to program it to control the devices of your choice. There are two ways to program the remote - direct code entry or auto code search.

Direct Code Entry (Recommended)

1.Locate the Remote Code List provided in this manual. Find the DEVICE CATEGORY you wish to program (for example TV, DVD, CBL/SAT, DVR/ AUX) and then find the BRAND of that device. Circle all the codes under that brand. Example: For a GE TV, locate the TV code section then circle all of the GE TV codes.

2.Manually turn on the device you wish to control.

3.Press and hold the SETUP button

until the red indicator light stays on (approximately 4 seconds) and then release the SETUP button.

4. Press and release the desired device button on the remote (TV, DVD, CBL/ SAT, DVR/AUX). The red indicator will blink once and then remain on.

5. Enter the first 4-digit code previously found in the code list using the number buttons on the remote. If the code entered is a valid code, the red indicator light will turn off. If the code entered is not a valid code, the red indicator light will flash and remain on allowing you to re-enter the code.

Note: If no buttons are pressed for 10 seconds, the remote will exit the SETUP mode and you will have to start over.

6

Image 6

Contents Universal Remote Control Remoto Universal Manual de InstruccionesTable of Contents Setup To Install the BatteriesButton Functions RECORD, PLAY, Stop REW, FF, PauseButton Functions, Onoff TurnsProgramming Your Remote Direct Code Entry RecommendedProgramming Your Remote, Programming NotesAuto Code Search Programming Your Remote, Using Your Remote SHIFT/SETUP then MUTE/OKSHIFT/SETUP then LAST/EXIT Disabling the Master Volume Feature Using Your Remote,Enabling the Master Volume Feature TV, DVD, SAT, AUX which isReset to Factory Settings Code IdentificationRemote does not operate your device TroubleshootingRemote does not operate some features of your device Remote Code is not available for a combo device e.g. TV/VCRDay Limited Warranty FCC Statement Para Restablecer las Configuraciones ÍndicePrecauciones con las Pilas ConfiguraciónPara Instalar las Pilas Ahorrador de PilasFunciones de los Botones RECORD, PLAY, Stop REW, FF, PauseFunciones de los Botones, continuación Channel ARRIBA/ABAJOProgramación de su Control Remoto Entrada Directa de Códigos se RecomiendaProgramación de su Control Remoto, Notas Sobre la ProgramaciónBúsqueda Automática de Códigos Programación de su control remoto, Uso de su Control Remoto Para Desactivar la Función de Volumen Principal Función de Volumen PrincipalPara Habilitar la Función de Volumen Principal Uso de su Control Remoto, continuaciónPara Restablecer las Configuración Predeterminadas Identificación de códigosSolución de Problemas El control remoto no controla el dispositivoLos botones del control remoto no funcionan correctamente Garantía Limitada de 90 Días Declaración de la FCC Code List Lista de Códigos CobyCXC ESA 5006, 5007, 5009 SVA TV/VCR Combos TV/DVD CombosSAT/CBL OAK RCADVD 3D LABILO HD-DVD DVD-RDVD/VCR Combos Vudu DVR/PVRVCR DBXHewlett Packard 6372 AUX STSAuvio 7082, 7109, 7123, 7219, 7233 Audio AMPJVC Page 24914-09/11