GE 24914 instruction manual Programming Your Remote, Programming Notes

Programming Your Remote, cont.

6.Point the remote at the device. Press the POWER button—if the device turns off, no further programming is required for that device. If the device does not turn off, return to step 3 and use the next code found in the code list. Continue this process until a code for your device is found.

7.Repeat this process for each device (for example TV, DVD, CBL/SAT, DVR/ AUX) in your home entertainment system you wish to control. Four devices can be programmed.

Programming Notes

•If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.

•Sometimes the first code that “works” with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

•With the Direct Code Entry method, you can program any device button to control any device in your home entertainment system.

For example, you can use the DVR/AUX device button to control an audio receiver or a DVD, VCR, satellite device, etc.

•For combination devices, you may have to enter a code for each device. For example, for a VCR/DVD device, you may have to enter a code for the DVD under the DVD button and enter a code for the VCR using a different device button on the remote.

•Write down the code found to operate your device for future reference.

7