GE 24938 Using Your Remote, Enabling the Master Volume Feature, TV, DVD, SAT, AUX which is

Page 11

Using Your Remote, cont.

Master Volume Feature

The Master Volume Feature allows you to select a single device (TV or audio receiver) that the volume control always controls. For example, the remote can be in TV mode while the volume buttons control the volume on your audio receiver instead of your TV.

Enabling the Master Volume Feature

1.Press and hold the SETUP button until the red indicator stays on

(approximately 4 seconds) and then

release the button.

2. Press and release desired device button (TV, DVD, SAT, AUX) for the device you wish to setup to control

the volume.

3.Press and release the MUTE button.

4.Press and release the VOL button. The red indicator will blink twice and

then go off.

To test the feature put the remote in another mode such as the TV mode if you programmed the audio receiver to be the Master Volume Device. Point the remote at the audio receiver, press and hold either the VOL or the VOL button. If the audio receiver volume changes then the remote is programmed correctly. If the TV volume changes and not the audio receiver, you will have to repeat the steps above and test again.

Disabling the Master Volume Feature

1. Press and hold the SETUP button until the red indicator stays on

(approximately 4 seconds) and then release the button.

2. Press and release the device button

(TV, DVD, SAT, AUX) which is

programmed to control the Master

11

Image 11

Contents Control Remoto Universal Manual de Instrucciones Universal RemoteTable of Contents To Install the Batteries SetupRECORD, PLAY, Stop REW, FF, Pause Button FunctionsOnoff Turns Button Functions,Direct Code Entry Recommended Programming Your RemoteProgramming Notes Programming Your Remote,Auto Code Search Programming Your Remote, SHIFT/SETUP then LAST/EXIT Using Your RemoteSHIFT/SETUP then MUTE/OK TV, DVD, SAT, AUX which is Using Your Remote,Enabling the Master Volume Feature Disabling the Master Volume FeatureCode Identification Reset to Factory SettingsRemote Code is not available for a combo device e.g. TV/VCR TroubleshootingRemote does not operate some features of your device Remote does not operate your deviceDay Limited Warranty FCC Statement Índice Para Restablecer las ConfiguracionesAhorrador de Pilas ConfiguraciónPara Instalar las Pilas Precauciones con las PilasRECORD, PLAY, Stop REW, FF, Pause Funciones de los BotonesChannel ARRIBA/ABAJO Funciones de los Botones, continuaciónEntrada Directa de Códigos se Recomienda Programación de su Control RemotoNotas Sobre la Programación Programación de su Control Remoto,Búsqueda Automática de Códigos Programación de su control remoto, Uso de su Control Remoto Uso de su Control Remoto, continuación Función de Volumen PrincipalPara Habilitar la Función de Volumen Principal Para Desactivar la Función de Volumen PrincipalIdentificación de códigos Para Restablecer las Configuración PredeterminadasLos botones del control remoto no funcionan correctamente Solución de ProblemasEl control remoto no controla el dispositivo Garantía Limitada de 90 Días Declaración de la FCC CXC Code List Lista de CódigosCoby ESA 5006, 5007, 5009 SVA SAT/CBL TV/VCR CombosTV/DVD Combos RCA OAKILO DVD3D LAB DVD/VCR Combos HD-DVDDVD-R DBX DVR/PVRVCR VuduHewlett Packard 6372 Auvio AUXSTS 7082, 7109, 7123, 7219, 7233 JVC AudioAMP Page 24938-09/11