GE 24938 instruction manual Troubleshooting, Remote does not operate your device

Page 13

Troubleshooting

Remote does not operate your device.

Press the device button of the device you want to control.

Program the remote with a new code.

Install new batteries. (You might have to reprogram your remote after installing new batteries.)

Remote may not be compatible with your device.

Remote does not operate some features of your device.

Sometimes a particular code might operate some features but not all. Try programing remote with a new code.

Remote may not be able to operate all features of your device or button names might be different than your device.

Red Indicator blinks and stays on after you program a product code.

Remote did not accept the code.

Try to program the code again or try a different code.

Remote Code is not available for a combo device (e.g. TV/VCR)

• See section for controlling combo devices.

Remote buttons are not operating properly

Check to ensure the remote is not in shift mode. Press and release the SETUP/SHIFT button and see if the remote buttons operate properly. If this does not help, press and release the SHIFT/SETUP button again to exit the shift mode.

For additional troubleshooting information please visit www.jascoproducts.com

13

Image 13
Contents Control Remoto Universal Manual de Instrucciones Universal RemoteTable of Contents To Install the Batteries SetupRECORD, PLAY, Stop REW, FF, Pause Button FunctionsOnoff Turns Button Functions,Direct Code Entry Recommended Programming Your RemoteProgramming Notes Programming Your Remote,Auto Code Search Programming Your Remote, SHIFT/SETUP then MUTE/OK Using Your RemoteSHIFT/SETUP then LAST/EXIT Enabling the Master Volume Feature Using Your Remote,Disabling the Master Volume Feature TV, DVD, SAT, AUX which isCode Identification Reset to Factory SettingsRemote does not operate some features of your device TroubleshootingRemote does not operate your device Remote Code is not available for a combo device e.g. TV/VCRDay Limited Warranty FCC Statement Índice Para Restablecer las ConfiguracionesPara Instalar las Pilas ConfiguraciónPrecauciones con las Pilas Ahorrador de PilasRECORD, PLAY, Stop REW, FF, Pause Funciones de los BotonesChannel ARRIBA/ABAJO Funciones de los Botones, continuaciónEntrada Directa de Códigos se Recomienda Programación de su Control RemotoNotas Sobre la Programación Programación de su Control Remoto,Búsqueda Automática de Códigos Programación de su control remoto, Uso de su Control Remoto Para Habilitar la Función de Volumen Principal Función de Volumen PrincipalPara Desactivar la Función de Volumen Principal Uso de su Control Remoto, continuaciónIdentificación de códigos Para Restablecer las Configuración PredeterminadasEl control remoto no controla el dispositivo Solución de ProblemasLos botones del control remoto no funcionan correctamente Garantía Limitada de 90 Días Declaración de la FCC Coby Code List Lista de CódigosCXC ESA 5006, 5007, 5009 SVA TV/DVD Combos TV/VCR CombosSAT/CBL RCA OAK3D LAB DVDILO DVD-R HD-DVDDVD/VCR Combos VCR DVR/PVRVudu DBXHewlett Packard 6372 STS AUXAuvio 7082, 7109, 7123, 7219, 7233 AMP AudioJVC Page 24938-09/11