Preset channels manually, Manual, Search

Use this method if there are only a few channels in your area to preset or if you want to preset channels one by one. You may also allocate programme numbers to various video input sources.

If you have made a mistake

Press ≅ to go back to the previous position.

To return to the main menu

Keep pressing ≅.

To go back to the normal TV picture Press MENU.

3 Preset channels manually

1Select the symbol for “Preset” with >+ or ?– and press OK. The PRESET menu appears. (See Fig. 6.)

2Select “Manual Programme Preset” with >+ or ?– and press OK. The MANUAL PROGRAMME PRESET menu appears. (See Fig. 7.)

3Using >+ or ?–, select the programme position (number button) to which you want to preset a channel, and press OK.

4Select, if necessary the TV broadcast system or a video input source (EXT)) with >+ or ?–.

5Then press OK. The CH position will be highlighted. (See Fig. 8.)

6Using >+ or ?–, select C (to preset a regular channel), S (cable channel) or F (to tune in by frequency) and press OK.

The first element of the “CH” number will be highlighted.

If you have selected EXT in step 5, select the video input source with >+ or ?–. (See Fig. 9.)

There are two ways to preset channels, If you know the channel number, go to step “7-Manual,”

If you don’t know the channel number, go to step “7-Search.”

PRESET
Auto Programme
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
Select	and press OK

Fig. 6

MANUAL PROGRAMME PRESET

PROG	SYS	CH	SEARCH	LABEL
1	B/G	C21	off	- - - - -
2	B/G	C34	off	- - - - -
3	B/G	C33	off	- - - - -
4	B/G	C45	off	- - - - -
5	B/G	C02	off	- - - - -
6	B/G	C08	off	- - - - -
7	B/G	C10	off	- - - - -
8	B/G	C12	off	- - - - -
9	B/G	C20	off	- - - - -
10	B/G	C59	off	- - - - -

Select and press OK

Fig. 7


2 B/G	C	2	1	off – – – – –

Fig. 8

	7	Manual
	-a	Select the first element of the “CH” number with >+ or ?– or the
		number buttons and press OK.
To tune in a channel by		The second element of the “CH” number will be highlighted.
To tune in a channel by
frequency	-b	Select the second element of the number with >+ or ?– or the
After selecting F in step 6,		number buttons.
enter three digits using		The selected number appears. (See Fig. 10.)
the number buttons.	-c	Press OK
	-c	Press OK
		The “SEARCH” position is highlighted and the selected channel is
		now stored. (See Fig. 11.)
	-d	Press OK until the cursor appears by the next programme position.
	-e Repeat steps 3 to 7 to preset other channels.

7 Search

-a Press OK repeatedly until the colour of the SEARCH position changes.

-b Start searching for the channel with >+ (up) or ?– (down). The CH position changes colour. (See Fig. 12.)

The CH number starts counting up or downwards. When a channel is found, it stops. (See Fig. 13.)

-c Press OK if you want to store this channel. If not, press >+ or ?– to continue channel searching.

-d Press OK until the cursor appears by the next programme position. -e Repeat steps 3 to 7 to preset other channels.

	3	EXT	AV1				– – – – –

Fig. 9

	2	B/G	C	2	1	off	– – – – –

Fig. 10

	2	B/G	C 35			off	– – – – –
Fig. 11

	2	B/G	C 35			off	– – – – –

Fig. 12

	2	B/G	C 5 0			4$ – – – – –
Fig. 13