NETGEAR ANT24D18v2 manual Wall Mount with Adjustable Bracket

Page 6

Wall Mount with Adjustable Bracket

Now, Connect the Antenna

The instructions below cover outdoor and indoor installations.

Connecting the Antenna for an Outdoor Installation

1.Turn off your wireless unit.

2.Connect the provided 2-meter cable to the antenna and to the arrestor as shown here. You can connect the cable to either of the two RF ports on the lightning arrestor.

14 dBi Patch Panel

Directional Antenna

ANT24D18v2

Wireless unit's

DC block45cm cable (provided)

N/SMA adapter

Lightning

2m cable

Wireless unit

arrestor

(provided)

 

Ethernet

(CAT 5) cable

NETGEAR cable

ACC-10314-01, 02, 03, 04, 05

(Sold separately)

Ground cable

Building

(Not provided)

grounding

3.Connect the grounding cable (not included) from the lightning arrestor to the ground of the building.

Grounding cable: The grounding cable must be equivalent or better than: AWG 10, UL 1015, Stranded, 600 V, 105 C, green or green/yellow insulation, 2 clip of 5.5 mm inner diameter cramped at both ends, cable no longer than 5 meters.

Warning: the lightning arrestor and appropriate ground cable must be used for outdoor installation. NETGEAR does not assume any responsibility in case of hazard resulting of non-compliance with these instructions.

4.Screw the N/SMA Reverse Adapter on the lightning arrestor (clockwise) on the second RF port. Connect a NETGEAR cable model ACC-10314-01, 02, 03, 04 or 05 (sold separat ely) to the adapter.

5.Locate the primary detachable antenna on the wireless access point. Remove the antenna and connect the other end of the NETGEAR cable ACC-10314-01, 02, 03, 04 or 05 to

this port.

8

9

Image 6
Contents ANT24D18v2 Installation Guide Introduction 1Configuration and Placement Pole Mount ConfigurationWall Mount Configuration With Adjustable Brackets Wall Mount Configuration With Fixed Brackets Placement and Other Important ConsiderationsInstalling the 14 dBi Patch Panel Directional Antenna Pole Mount InstallationWall Mount with Adjustable Bracket Connecting the Antenna for an Outdoor InstallationConnecting the Antenna for an Indoor Installation Specifications Description Meter Antenna CableDescription SMA Adapter Accessory Description Lightning ArrestorRadiation Pattern Elevation Vertical plane Radiation Pattern Azimuth Horizontal planePage Technical Support

ANT24D18v2 specifications

The NETGEAR ANT24D18v2 is a high-performance outdoor antenna designed to enhance the wireless range and signal quality of 2.4 GHz wireless networks. This directional antenna is ideal for creating long-range wireless connections in various settings, such as homes, offices, or outdoor environments. One of the standout features of the ANT24D18v2 is its impressive gain. With an 18 dBi gain, it is capable of significantly increasing the distance over which a wireless signal can be transmitted, making it a smart choice for users looking to extend their network coverage.

The antenna operates within the 2.4 GHz frequency band, which is widely used for Wi-Fi connections and supports various wireless standards, including 802.11b/g/n. Its directional characteristic allows it to focus the signal in a specific direction, minimizing interference and improving overall performance. This focus makes it perfect for point-to-point connections, such as connecting two buildings or enhancing coverage in a particular outdoor area.

Constructed with durable materials, the ANT24D18v2 is designed to withstand various weather conditions, making it suitable for outdoor installation. It features a rugged, UV-resistant exterior that ensures longevity and reliability even in harsh environments. Furthermore, the antenna is easy to install, with mounting hardware included, allowing users to set it up quickly without requiring specialized tools or knowledge.

Compatibility is another highlight of the NETGEAR ANT24D18v2. It works seamlessly with a wide range of NETGEAR routers, access points, and other wireless devices, enabling users to expand their existing networks effortlessly. The antenna also supports MIMO (Multiple Input Multiple Output) technology, which further optimizes performance by utilizing multiple antennas for better data throughput and connection stability.

In summary, the NETGEAR ANT24D18v2 is a robust 2.4 GHz outdoor antenna that provides exceptional performance and versatility. With its high gain, directional properties, durable construction, and compatibility with various devices, it is an excellent solution for anyone looking to enhance their wireless network coverage significantly. Whether for personal use or in a business setting, the ANT24D18v2 delivers reliable connectivity and improved wireless performance.