•Administer Local Device Settings—This option enables the user to configure the RILOE II management processor settings. These settings include the options available on the Global Settings, Network Settings, SNMP Settings, and Directory Settings screens of the RILOE II Web browser.

Directory services for eDirectory

The following sections provide installation prerequisites, preparation, and a working example of Directory Services for eDirectory.

eDirectory installation prerequisites

Directory Services for RILOE II uses LDAP over SSL to communicate with the directory servers. RILOE II software is designed to install in an eDirectory version 8.6.1 (and above) tree. HP does not recommend installing this product if you have eDirectory servers with a version less than eDirectory 8.6.1. Before installing snap-ins and schema extensions for eDirectory, you should read and have available the following technical information documents, available at Novell Support (http://support.novell.com).

Installing Directory Services for RILOE II requires extending the eDirectory schema. Extending the schema must be completed by an Administrator.

•TID10066591 Novell eDirectory 8.6 NDS compatibility

•TID10057565 Unknown objects in a mixed environment

•TID10059954 How to test whether LDAP is working correctly

•TID10023209 How to configure LDAP for SSL (secure) connections

•TID10075010 How to test LDAP authentication

Snap-in installation and initialization for eDirectory

Refer to "Snap-in installation and initialization ("Snap-in installation and initialization for Active Directory" on page 85)" for step-by-step instructions on using the snap-in installation application.

NOTE: After the snap-ins are installed, ConsoleOne and MMC must be restarted to show the new entries.

Example: Creating and configuring directory objects for use with LOM devices in eDirectory

The following example shows how to set up roles and HP devices in a company called samplecorp, which consist of two regions, region1 and region2.

Directory services 92