HP 232664-006 manual Obtaining a specific configuration

<PRIM_WINS_SERVER value = "16.81.3.247"/>

<STATIC_ROUTE_1 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/> <STATIC_ROUTE_2 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/> <STATIC_ROUTE_3 DEST = "0.0.0.0" GATEWAY = "0.0.0.0"/> </MOD_NETWORK_SETTINGS>

<ADD_USER

USER_NAME = "Administrator"

USER_LOGIN = "Administrator" PASSWORD = ""> </ADD_USER>

<ADD_USER

USER_NAME = "Landy9"

USER_LOGIN = "mandy9" PASSWORD = ""> </ADD_USER> <RESET_RIB VALUE = "Y"/> </HPONCFG>

For security reasons, the user passwords are not returned.

Obtaining a specific configuration

A specific configuration can be obtained using the appropriate XML input file. For example, here are the contents of a typical XML input file, get_global.xml:

<!-- Sample file for Get Global command --> <RIBCL VERSION="2.0">

<LOGIN USER_LOGIN="x" PASSWORD="x"> <RIB_INFO MODE="read"> <GET_GLOBAL_SETTINGS /> </RIB_INFO>

</LOGIN>

</RIBCL>

The XML commands are read from the input file get_global.xml and are processed by the device: HPONCFG /f get_global.xml /l log.txt > output.txt

The requested information is returned in the log file, which, in this example, is named log.txt. The contents of the log file are shown below.

<GET_GLOBAL_SETTINGS> <SESSION_TIMEOUT VALUE ="15"/> <F8_PROMPT_ENABLED VALUE ="YES"/> <HOST_KEYBOARD_ENABLED VALUE ="YES"/> <REMOTE_KEYBOARD_MODEL VALUE ="US"/>

<REMOTE_CONSOLE_PORT_STATUS VALUE ="ENABLED"/> <PASSTHROUGH_CONFIG VALUE ="3"/> <SNMP_PASSTHROUGH_STATUS VALUE ="YES"/> <POCKETPC_ACCESS VALUE ="NO"/>

<EMS_STATUS VALUE ="NO"/>

<BYPASS_POWER_CABLE_REPORTING VALUE ="NO"/> <CIPHER_STRENGTH VALUE ="40"/> <HTTPS_PORT VALUE ="443"/>

<HTTP_PORT VALUE ="80"/>

Scripting, command line, and utility options 137