3.Make and save any necessary changes to the RILOE II.

4.Exit the RBSU.

SmartStart setup of RILOE II

Use RBSU F8 during SmartStart to configure the RILOE II. Configuring the RILOE II using SmartStart is not an option.

Installing RILOE II device drivers

The RILOE II Management Interface Driver enables system software, such as SNMP Insight Agents and the Terminal Services pass-through service, to communicate with RILOE II.

The device drivers required to support RILOE II are part of the PSP located on the SmartStart CD or the, Management CD, or on the HP website (http://www.hp.com/servers/lights-out).

All the support drivers for your server and RILOE II can be downloaded from the HP website (http://www.hp.com/servers/lights-out).

To download the device drivers:

1.Click the RILOE II graphic.

2.Select Software and Drivers.

Microsoft device driver support

The device drivers that support the RILOE II are part of the PSP that is located on the HP website

(http://www.hp.com/support) or on the SmartStart CD. Before you install the Windows® drivers, obtain the Windows® documentation and the latest Windows® Service Pack.

RILOE II prerequisite files:

CPQCIDRV.SYS provides the RILOE II Management Interface Driver support.

CPQASM2.SYS, SYSMGMT.SYS, and SYSDOWN.SYS provide the RILOE II Advanced Server Management Controller Driver support.

PSP for Microsoft® Windows® products includes an installer that analyzes system requirements and installs all drivers. The PSP is available on the HP website (http://www.hp.com/support) or on the SmartStart CD.

To install the drivers in the PSP:

1.Download the PSP from the HP website (http://www.hp.com/support).

2.Run the SETUP.EXE file included in the download, and follow the installation instructions.

For additional information about the PSP installation, read the text file included in the PSP download.

Novell NetWare device driver support

The device drivers required to support RILOE II are part of the PSP that is located on the SmartStart CD and the HP website (http://www.hp.com/support).The PSP for Novell NetWare includes an installer that analyzes system requirements and installs all drivers.

RILOE II prerequisite files:

The CPQHLTH.NLM file provides the Health Driver for Novell NetWare.

The CPQCI.NLM file provides RILOE II Management Interface Driver support.

Configuring the RILOE II 20

Page 20
Image 20
HP 232664-006 manual Installing Riloe II device drivers, SmartStart setup of Riloe, Microsoft device driver support