HP 232664-006 manual Using the Riloe, Accessing Riloe II for the first time

Using the RILOE II

In this section
Accessing RILOE II for the first time	23
Features of the RILOE II	25
Managing the user and configuration settings of the RILOE II	25
Using the Remote Console	35
Terminal Services pass-through option	41
Using virtual devices	45
Resetting the RILOE II to the factory default settings	57
Getting help	58
Pocket PC access with RILOE II	58

Accessing RILOE II for the first time

RILOE II is preconfigured with a default user name, password, and DNS name. A network-settings tag that shows the default values is attached to the board. Use these values to access the board remotely from a network client using a standard browser. For security reasons, HP recommends that you change these default settings after accessing RILOE II for the first time.

Default values:

•User name: Administrator

•Password: The last eight digits of the serial number

•DNS name: RIBXXXXXXXXXXXX, where the 12 Xs are the MAC address of RILOE II

NOTE: User names and passwords are case sensitive.

Using the RILOE II 23