Code |
|
|
|
|
|
1 | VGA PCI initialization error | • HOST server PCI bus is not functioning |
|
| correctly |
|
| • RILOE II PCI bus is not functioning correctly |
|
| • VGA is not functioning correctly |
|
|
|
2 | IRC PCI initialization error | • HOST server PCI bus is not functioning |
|
| correctly |
|
| • RILOE II PCI bus is not functioning correctly |
|
| • IRC is not functioning correctly |
|
|
|
3 | IRC initialization error | IRC is not functioning correctly |
|
|
|
4 | Video initialization error | Video is not functioning correctly |
|
|
|
5 | Keyboard system initialization error | Keyboard system is not functioning correctly |
|
|
|
6 | Telnet system initialization error | Telnet system is not functioning correctly |
|
|
|
7 | Remote Console system initialization | Remote Console system is not functioning |
| error | correctly |
|
|
|
Restarting the host server
An administrator can restart the host server by using the options listed on the Virtual Devices tab:
•Turn Server Power
Clicking Turn Server Power ON/OFF is analogous to pressing the physical power button of the host server.
IMPORTANT: Using the Virtual Power Button option does not gracefully shut down the host server operating system. For a graceful shutdown of a server operating system, use HP Insight Manager or the Remote Console before using the Virtual Power Button option.
•Power Cycle
To power cycle a host server:
1.Click Power Cycle Server on the Virtual Power screen. A confirmation screen is displayed, followed by a warning.
2.Click Confirm to begin rebooting the host server.
After the host server reboots, a Remote Console session begins, allowing you to observe
Directory Services errors
The following are the most common Directory Services LDAP errors.
•Directory Server Connect Failed
•Invalid Credentials
•Invalid Directory server address or port
•Directory Server Timeout
Troubleshooting the RILOE II 185