NETGEAR ANT24D18v2 manual Connecting the Antenna for an Indoor Installation

Page 7

Note: On access points with two antennas, if you are only replacing one antenna, be sure to replace the primary antenna and do not remove the secondary antenna.

6.If connecting 2 ANT24D18v2 antennas: repeat step 2 to 5 for the second antenna and connect it the secondary port. If the wireless device supports transmit/receive on both ports, the 2 antennas can be used to cover 2 separate or partial overlapping WLAN areas.

For instance the 2 ANT24D18v2 could be oriented at 90 degrees and positioned 50 feet away and using the WG302 access point. The 2 antennas can also be used to provide spatial diversity.

If the wireless device transmits only with the primary antenna port, the 2 ANT24D18v2 antennas can be used only for spatial diversity.

Spatial diversity: place the 2 antennas 3 to 9 feet away and oriented toward the same direction.

7.After attaching your new 14 dBi antenna(s), reconnect your wireless device to the network

and turn it on.

Connecting the Antenna for an Indoor Installation

1.Turn off your wireless unit.

2.Connect the reverse N/SMA adapter to the antenna.

3.Connect a NETGEAR antenna cable model ACC-10314-01, 02, 03 or 04 to the reverse N/SMA adapter.

14 dBi Patch Panel

Directional Antenna

ANT24D18v2

4.Locate the primary detachable antenna of the wireless device. Remove the antenna and

connect the other end of the NETGEAR cable ACC-10314-01, 02, 03 or 04 to this port.

Note: On access points with two antennas, if you are only replacing one antenna, be sure to replace the primary antenna and do not remove the secondary antenna.

5.If connecting 2 ANT24D18v2 antennas: repeat step 2 to 4 for the second antenna and connect it the secondary port. If the wireless device supports transmit/receive on both ports, the 2 antennas can be used to cover 2 separate or partial overlapping WLAN areas. For instance the 2 ANT24D18v2 antennas could be oriented at 90 degrees and positioned 50 feet away and using the WG302 access point. The 2 antennas can also be used to provide spatial diversity.

If the wireless device transmits only with the primary antenna port, the 2 ANT24D18v2 antennas can be used only for spatial diversity.

Spatial diversity: place the 2 antennas 3 to 9 feet away and oriented toward the same direction.

6.After attaching your new 14 dBi antenna(s), reconnect your wireless device to the network and turn it on. The provided 2m cable and lightning arrestor should not have been used.

NETGEAR antenna cable

Wireless Access Point

ACC-10314-01, 02, 03, 04 or 05 (sold separately)

Antenna Connection

10

11

Image 7
Contents ANT24D18v2 Installation Guide Introduction Pole Mount Configuration 1Configuration and PlacementWall Mount Configuration With Adjustable Brackets Placement and Other Important Considerations Wall Mount Configuration With Fixed BracketsPole Mount Installation Installing the 14 dBi Patch Panel Directional AntennaConnecting the Antenna for an Outdoor Installation Wall Mount with Adjustable BracketConnecting the Antenna for an Indoor Installation Description Meter Antenna Cable SpecificationsDescription Lightning Arrestor Description SMA Adapter AccessoryRadiation Pattern Azimuth Horizontal plane Radiation Pattern Elevation Vertical planePage Technical Support

ANT24D18v2 specifications

The NETGEAR ANT24D18v2 is a high-performance outdoor antenna designed to enhance the wireless range and signal quality of 2.4 GHz wireless networks. This directional antenna is ideal for creating long-range wireless connections in various settings, such as homes, offices, or outdoor environments. One of the standout features of the ANT24D18v2 is its impressive gain. With an 18 dBi gain, it is capable of significantly increasing the distance over which a wireless signal can be transmitted, making it a smart choice for users looking to extend their network coverage.

The antenna operates within the 2.4 GHz frequency band, which is widely used for Wi-Fi connections and supports various wireless standards, including 802.11b/g/n. Its directional characteristic allows it to focus the signal in a specific direction, minimizing interference and improving overall performance. This focus makes it perfect for point-to-point connections, such as connecting two buildings or enhancing coverage in a particular outdoor area.

Constructed with durable materials, the ANT24D18v2 is designed to withstand various weather conditions, making it suitable for outdoor installation. It features a rugged, UV-resistant exterior that ensures longevity and reliability even in harsh environments. Furthermore, the antenna is easy to install, with mounting hardware included, allowing users to set it up quickly without requiring specialized tools or knowledge.

Compatibility is another highlight of the NETGEAR ANT24D18v2. It works seamlessly with a wide range of NETGEAR routers, access points, and other wireless devices, enabling users to expand their existing networks effortlessly. The antenna also supports MIMO (Multiple Input Multiple Output) technology, which further optimizes performance by utilizing multiple antennas for better data throughput and connection stability.

In summary, the NETGEAR ANT24D18v2 is a robust 2.4 GHz outdoor antenna that provides exceptional performance and versatility. With its high gain, directional properties, durable construction, and compatibility with various devices, it is an excellent solution for anyone looking to enhance their wireless network coverage significantly. Whether for personal use or in a business setting, the ANT24D18v2 delivers reliable connectivity and improved wireless performance.