Tuning with channel numbers
Enter the SETUP menu by pressing the blue button.
Press OK button when CHANNEL row is blue.
Use OK button to select “S” for cable channels and “C” for terrestrial broadcast.
Enter the channel number using the Numeric buttons or use the Volume up/down buttons on your remote control.
Use the Program down button to
10
select PROGRAM NUMBER.
Use the Volume up/down or numeric buttons to select the desired programme number.
Use the Program down button to select STORE. Press theOKbutton and STORED will appear on the STORE line.
You have now stored the first channel.
Use the Program up button to select again CHANNEL and continue the tuning procedure until you have tuned in all the programmes you want or the television can receive.
To exit the SETUP menu press the
TV/TX button.
Fine tuning
Although the search and Autoprogram will automatically try and tune to the best reception, in areas of poor reception a bit of fine tuning may be required.
In the SETUP menu use the Program up/down buttons to select FINE TUNING. Use the Volume up and Volume down buttons to fine tune.
When you have finished use the Program down button to select STORE and press the OK button.
SETUP
+ 10