Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched off.
Plug one end of the SCART lead (not supplied) into the back of the decoder and the other end into the SCART 1
on the back of the TV.
Switch on the decoder and the TV.
| AV | Press the AV button on the remote | |
24 | control to select AV1. | ||
|
Via RCA lead
Make sure the TV and decoder are both switched off.
Note: For Decoder connection Via RCA lead your Decoder device should have the tuner built in.
Plug one end of the RCA lead into the video and audio out sockets on the back of the decoder and plug the other end into the video and audio in sockets on the TV.
Press the AV button repetitively and select the AV3 mode (AV4 optional).
Please Note
You can record from one external device to another via scart sockets. You should select the source and destination of video using FEATURES menu. If you select the source as
You can connect NTSC supported equipment to the TV via the SCART sockets and adjusting the colour via the PICTURE menu.
AV3/AV4
R
AUDIO OUT
L | AV3 |
| AV1 |
| AV2 |