ITT CTV 29-100 ST Getting started, Box, Aerial connection, Battery fitting, Switching on

	Getting started
	Remove your Television carefully		Please Note
	from the box. You may wish to		When not in use disconnect the plug
	store the packaging for future use.		from the mains power supply.
			Press the Power button on
	In the box		the front of the TV. The
			standby indicator will
	Inside your this package you should have:		7 illuminate.
	•	Television	Press a Numeric button or the
	•	Remote control	Program up or Program down
	•	User guide	button on the remote handset or
	•	AAA batteries x 2	Program up or Program down
4	Read these instructions before use.		button on the front panel to
			switch the TV on.
	Aerial connection		The standby indicator remains on.
			The picture will appear after a
	To connect an aerial, plug the aerial lead
			few seconds.
	into the aerial socket on the rear of the
	TV.		Press the Standby button to switch
			the TV to standby. The standby
			indicator will brighter.
			Please Note
			Do not leave the television on standby
			unattended or overnight.
			Switching the TV on for the first time
			To install your TV, please read the sections
	You can use an outdoor or indoor aerial.		“TV controls” and “ Tuning the television”.
			Battery fitting
	However, if you use an indoor aerial the
	quality of the reception may be reduced		Insert the 2 AAA Batteries supplied into
	and adjustment of the aerial may be
			the compartment on the rear of the remote
	required when changing programs.
			control, ensure you follow the polarity

diagram inside the compartment.

Please note

If you live in a poor reception area or use an indoor aerial you may experience loss or corruption of teletext transmissions.

Switching on

Mains power

Connect the mains plug into the mains socket and switch on.

Connect the TV mains plug into your domestic mains socket outlet (230 V 50 Hz AC).