Introduction
3. Instruction for Wall Mount
A wall mount kit (purchased separately) will allow you to mount your TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation.
HAIER is not responsible for any damage to the product or injury to yourself or others resulting from
Dimensions for Mounting Hole Pattern
200mm |
400mm |
-This TV is compatible with a 400mm x 200mm mounting hole pattern.
-4 pcs of type M5 screws are required for installing the wall mount bracket to your TV. Do not use screws that are longer than 12 mm. Screws that are too long may cause damage to the inside of the TV set.
-Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal injury. HAIER is not liable for these kinds of incidents
-Do not mount your TV at more than a 15 degree tilt.
-Always use at least two people to mount the TV to a wall.
-Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
-We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference.
-Before mounting your TV on the wall, you need to remove the base if you attached it.
-For your safety, please use only with UL listed wall mount brackets with minimum weight of the TV without stand (53lbs).
8