Connection
Connection
Power Cord Connection
AC POWER IN
-Connect the TV to a wall outlet using the included AC power cord.
-When you connect the power cord, the TV enters into standby mode and the LED indicator on the front of the TV will be red.
-Turn on the TV by pressing the POWER button on the TV or remote control, and the LED indicator will be turn off.
Note: It is recommended to unplug the TV if it will not be used for a long time, such as during a vacation.
Antenna (RF) Connection
Wall jack with
HDMI2(MHL) | HDMI3 | USB | RF IN |
Coaxial Antenna Cable
RF
External Antenna
Press the INPUT button on the remote control to display the input source menu, use the CH buttons to select TV and then press the OK button to confirm.You will need to perform a channel scan to be able to view TV channels. Please see the auto scan section on page 17.
11