Loewe Connect 32 Full-HD+ 100, Connect 37 Full-HD+ 100 Positioning/aligning the DVB-T antenna

Initial installation

Start search	Start the automatic station search with OK.
	The set now searches for TV and DVB radio stations.
	The stations found in the automatic search are divided into
	the appropriate station blocks depending on the previously
	selected antenna cables (signal sources). Subsequently the
	stations can only be re-sorted within these blocks. At the
	beginning of the station list you will find the block with
	the stations of the preferred signal source.
	Any mixed sorting of stations from different signal sources
	is only possible with the favourites list.
Age-related	You can specify an age limit for your TV set here. DVB
lock	broadcasts which have an appropriate age identification
	are locked and can only be watched after entering the
	access code (see page 41).
Connecting	Then the connection and sound component wizard
additional	starts which helps you to log in, set and connect video
devices	recorders, decoders, a loudspeaker system or a HiFi/AV
	amplifier to your TV set. A DVD recorder is already logged
	in ex factory.
	You can start the connection wizard and the sound
	components wizard manually later and add new devices.
	Further information is available from page 44 (Connec-
	tion wizard) and page 51 (Sound components wizard).
Digital Link	If you have logged in and connected a recorder in the
Plus	connection wizard, the Digital Link Plus transmission
	starts when the sound component wizard closes. If a
	Digital Link Plus compatible recorder is connected, the
	station list of the analogue stations is transmitted to the
	external recorder.
	You can also call Digital Link Plus manually under TV menu
	Connections Digital Link Plus.

Explanations of the DVB-T antenna:

Room	With good reception conditions a room antenna can be
antenna	used for DVB-T (socket ANT2).
Active	Under less favourable reception conditions, an active
antenna	antenna is recommended which must be set accordingly
	in the first time commissioning or in the TV menu Con-
	nections Antenna DVB Antenna DVB-T (see DVB-T
	Antenna on page 13).
Directional	If the location is outside of the normal transmission range
antenna	then a directional antenna can be used to improve recep-
	tion quality.

Downloaded From TV-Manual.com Manuals

Positioning/aligning the DVB-T antenna

If you receive one or more DVB-T stations with picture or sound interfer- ence, you should change the position and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region.

➠In normal TV mode, without other displays. A DVB-T station is received and selected.

Call TV menu.

￿￿Select Settings,

￿￿go to the menu line below.

￿￿Select Stations,

￿￿go to the menu line below.

￿￿Select Manual adjustment, OK call manual adjustment.

Signal source

Select the area in which you want the broadcaster to search here. You can

use the button to automatically select station by station.

Manual adjustment
SIgnal source	DVB-T	DVB-C	DVB-S	A
Channel	E05
Frequency	177.50 MHz
Bandwidth	7 MHz
Name	12 Test
C/N	81
Level	80
BER	0 E-7

	END
Overwrite station
Search	INFO

The signal source is already on DVB-T due to the station preselection.

Position and align the antenna in such a manner that maximum values for C/N and Level are obtained.

Blue button: Start search.

Search for DVB-T stations one after another and compare values for C/N and Level.

Then position/align the antenna to the weakest station so that maximum values for C/N and Level are obtained.

Thereafter perform an automatic search for all DVB-T stations, see page 26.

Explanation of the setting possibilities:

Bandwidth Depending on the selected channel and country the as- sociated bandwidth will be set automatically.

- 14