Loewe Connect 42 Full-HD+ 100 Appropriate AV socket, see, Connecting a DVD player to the TV set

Operating additional equipment

Devices to the connections AV1/AV2/AVS

Accessory equipment such as DVD players, video and DVD recorders etc. can be connected to the TV set at the Euro-AV sockets AV1 and AV2 (see pages 5 and 6).

The AV input AVS (see pages 5 and 6) offers the possibility of connecting a digital camera or a camcorder for example.

➠All devices at the AV inputs must be registered in in the connection wizard (see page 44 onwards).

The connection designations vary according to the logged in device. The AV selection then contains, for example, DVD in place of AV1 or CAM in place of AVS.

The Euro-AV sockets can process different signal types. Which signal type your accessory device provides can be found in the operating manual of the appropriate device.

Owing to the large number of AV devices available on the market, we can only mention a few examples for the connection of accessory equipment to the AV sockets here.

The following description of the connected equipment to the connec- tions AV1/2/S refers to the device types logged into the connection wizard from page 44 onwards.

If the sound of a device connected to an AV socket is to be transmit- ted digitally, a cinch cable must be plugged between the coaxial digital output of the accessory equipment and the AUDIO DIGITAL IN socket of the TV set. In addition the digital audio input must be assigned to the corresponding AV socket in the connection wizard (see page 45).

The assignment of the digital audio input may also take place outside the connection wizard. With TV menu Connections Miscellaneous Assign digital audio input, the digital audio input can be assigned to

the appropriate AV socket, see page 53.

Downloaded From TV-Manual.com Manuals

Connecting a DVD player to the TV set

➠DVD player is registered with the connection wizard. Switch off all equipment before connecting.

Connect the Euro-AV output of the DVD player to the AV1 socket of the TV set.

Use a fully equipped Euro-AV cable (available from your dealer) for this.

TV set

Connection example of a DVD player

AV1

DVD player

Playback from AV device

If the device supports Digital Link Plus on AV1/2 or if Immediate playback yes was selected in the connection wizard, the TV set switches automati- cally to the appropriate AV input after switching on the AV device

The AV input can also be called manually, however.

Call AV selection.

AV selection

COMP. IN

HDMI2/DVI

HDMI1/DVI

PC IN

AVS

DVD-REC

VIDEO

OK Switch to ...

￿￿￿Select DVD, OK switch over.

Start playback on the connected device.